Question about 1997 Chrysler Cirrus

Open Question

Does plintum need to come off to replace spark plugs

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 nissan pathfinder v-6 automatic le ,Cleaned plintum and mass air flow sensor ,,Drove to gas station went to leave and RPMs started to pulse down and back up At 2000 rpms ?...?


What did you use to clean the MAF? Most cleaners for throttle bodies and carburetors will damage the MAF. You must use cleaner specifically designed for MAFs to ensure that they will not be damaged during cleaning.

Feb 26, 2015 | Nissan Pathfinder Cars & Trucks

1 Answer

Steps to change a spark plug


easy job replace one spark plug at a time.you need buy new set of spark plug wires and spark plugs.reason need new wires possible old ones will break from inside plug boot when you remove plug wires.you need basic 3/8 ratchet wrench.you need long short extensions.need spark plug socket.need spark plug gap gauge.need a universal joint connect to the extensions to reach sharp angles.make sure engine cold when replacing spark plugs could damage heads.use a 12 inch piece vacuum hose to help aid in installing sparks in hard reach spaces with out damaging crosss threading plugs threads and cylinder head threads to plug.

Apr 25, 2013 | 1998 Pontiac Grand Prix

1 Answer

Replace spark plug's


Things you will need
Spark Plug Socket And Wrench of the correct size for your spark plugs


Basic Instructions.
Step 1
Locate your spark plugs
look for other obstructions besides your spark plug wires
if you have any other obstructions you will need to remove them as well to gain access to your spark plugs.
Step 2
Remove the spark plug wire for one single spark plug at a time.
this will insure you will not replace the wrond spark plug wire to the incorrect spark plug,
if not done this way you could change the firing order of your engine.
Step 3
With your spark plug Socket and wrench rotate the spark plug in a counter clock wise direction for removing.
Step 4
After you have removed your spark plug insert your new replacement spark Plug into your spark plug socket before inserting it into the correct location. spark plug sockets are made to hold on to the spark plug for easy removal and install.
Step 5
insert your new spark plug,
before you rotate your spark plug for tightening rotate the spark plug a 1 quarter turn in the counter clock wise direction, then start tightening the spark plug by rotating it in a clockwise direction
This will insure you will not strip the threads.
Step 6
Continue rotation your spark plug in the clock wise direction untill snug, then with just a lil more pressure tighten it up just a little more.
be sure to not put to much force on the spark plug after it has been snug, you just have to apply a little more pressure but not to much that could cause it to break.
Step 7
After tightening the spark plug replace the correct spark plug wire.
then move on to the next spark plug and follow the same instructions.

if you have any other visiable obstructions preventing you access for replacing your spark plugs you will need instructions on how to remove them parts. i have just instructed you on how to remove and reinstall the spark plugs only.

Feb 16, 2013 | 2008 Mazda Tribute

1 Answer

A buzzing sound under the plintum and wont start sometimes. Or we will be driving down the road and it just quits


The buzzing sound might be the sound of a dead battery or faulty starter. Try charging the battery and putting it back. ----------------------------------------------------------------------------------------
ECU Chip Tuning Tool

Nov 19, 2012 | 1991 Ford F150

2 Answers

Need to replace sparkplugs on 2002 ford escape


well replace spark plugs is not a hard job,when replacing spark plugs, good time to replace plug wires also.you need to replace one spark plug at a time so you wont mix up firing order. you need a spark socket, torque wrench, 3/8 ratchet wrench, 3/8 short and long extensions,you need a spark plug gap gauge.spark plug gap for 2.0 engine 0.051 the 3.0 engine spark plug gap is 0.052 - 0.056. just follow spark plug wires they will lead you to the spark plugs.warning wait until engine cool down first because removing spark plugs from hot engine could damaged the aluminum heads,use compressed to blow away debris before removing spark plugs keep debris falling into the cylinders.wear safety glasses if you use compress air and use small amount anti seize compound to the spark plug threads.good idea slip a short length rubber hose over the end of spark plug to use as a tool thread it into place.reason i use piece vacuum hose it will grip the spark plug enough to turn it, but will start to slip if the plug begin to cross thread.when installing spark plug, it should turn at least few times if spark plug start tighten before 1/4 turn thread cross threading need to back off start over dont keep turning you will stripped spark plugs threads in the head also damage spark plug threads, so be careful, good luck with job.

Aug 26, 2012 | 2002 Ford Escape

1 Answer

Is a special tool required to change spark plugs in the 3.2L engine?


you will need 5/8 spark plug socket as well as a long extension to replace spark plugs.That you can get at local auto part stores.Plugs are on either rocker cover....there are 3 ign coils on each rocker cover that need to be removed then remove the plugs You will need a 5/8 spark plug socket as well as a long extension to replace them 8mm socket holds the individual coils on.
------------ ON 3.2L there are acually no spark plug wires, the engine acually has whats called, coil over plug which means the the power to make a spark plug spark, happens right over your spark plug. Now in order to get to the spark plugs which are under the coils you have to first unscrew the screws, there'll be two phillips head screws per coil, after that just pull the coil out, it should be about 3 inches, the spark plugs are at the bottom of the hole that you just uncoverd, you'll need an extesion for your socket in order to reach them, take them out, replace, put the coil back on top making sure that its seated ontop of the spark plug, put the two screws back in, tighten and your done with one, continue for all.
---------------- this should help.thanks.Helpmech.

Mar 01, 2011 | 1997 Isuzu Rodeo

2 Answers

Cylender number 1 misfire,


Do a complete tune up.. Spark plugs, wires, distributor cap, and rotor button... If it has coil packs that sit on top of the spark plugs.. Replace the spark plugs and cylinder number one coil

Feb 15, 2011 | 1998 Nissan 200SX

1 Answer

Do i need to replace spark plugs at 60,000 miles on my 2007 eclipse?


IF YOU HAVE STANDARD SPARK PLUGS REPLACE THEM AT 30000 MILES. IF YOU HAVE IRIDIUM SPARK PLUGS REPLACE THEM AT 105000 MILES. IF YOU HAVE PLATINUM SPARK PLUGS REPLACE THEM AT 60000 MILES.

Nov 22, 2010 | 2007 Mitsubishi Eclipse

1 Answer

Replacing spark plugs


Not exactly sure what you need?
Standard Rules:
Use a Spark Plug Socket to remove and install Spark Plugs.
Replace (remove) one Wire at a time from one Spark Plug.
Replace One Spark Plug at a time. Use Anti-Seize Grease applied moderately to the threads on the new Spark Plug.
Using a Socket (with a extension) START all installations using your hands. This prevents cross-threading and stripping of the threads inside the Heads.
Standard Torque 15-20 ft-lbs.
Replace the One Wire connection to that One Spark Plug.
Replace that One Wire connection to the Ignition Coil.
Go onto the next Spark Plug using the above Rules.
Repeat.

For the 3.4L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back)
1.......3.......5
2.......4.......6
......(front)
Ignition Coil Connections:
............(back)
.|.5..2.|..|.3..6.|..|.4..1.|
............(front)

Mar 21, 2010 | 1997 Chevrolet Venture

2 Answers

Where are the spark plugs


Instructions Things You'll Need:
  • Spark plug socket
  • Socket wrench with extender
  • Anti-seize compound
  • New spark plug
  • Tension tester tool
  1. Step 1 Raise the hood and locate the battery. Disconnect the negative battery cable. Allow the engine to cool before attempting this process. Depending on the climate, it may take 30 minutes or more to cool the engine.
  2. Step 2 Find the spark plug cables on the Kia Spectra engine of either a four- or six-cylinder variety. The number of cylinders indicates the number of spark plug cables on the engine.
  3. Step 3 Turn the cables by the boot, or cover, that connects to the engine or directly to the spark plug. Disconnect one cable and complete the replacement process before removing the other cables to ensure the cables don't cross. Pull back on the cable to reveal the spark plug.
  4. Step 4 Remove the spark plug from the cylinder well with the socket. The extender may not be needed for 4-cylinder engines. Turn the socket in a counter-clockwise motion to unscrew the plug and remove it from the cylinder block.
  5. Step 5 Use the applicator supplied with the anti-seize to spread the compound over the threads of the new spark plug. This compound allows for easy removal when you need to check or replace the spark plugs.
  6. Step 6 Screw the spark plug into the cylinder well by hand. The spark plug needs to be tight in the well but may have to be loosened after the tension test finishes.
  7. Step 7 Test the torque of the spark plug with the tension tester tool. Normally the spark plugs on a Kia Spectra need 18 to 22 ft-lbs torque. Check the Spectra model's owner's manual or the manufacturer's package because some premium or performance spark plugs use different torques.
  8. Step 8 Reconnect the spark plug wire and turn it to lock it in place. Continue replacing the rest of the spark plugs. Reconnect the battery cable after you replace all the spark plugs.

Oct 27, 2009 | 2002 Kia Spectra

Not finding what you are looking for?
1997 Chrysler Cirrus Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...