Question about 2004 Ford Taurus

Open Question

Windshield washer hose replacement on 2004 ford taurus

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 140 Answers

SOURCE: what is the spark plug gap for a 2004 ford taurus

Hello, go to www.autozone.com and put your car in the "manage my vehicles" tab and then click on the "Repair info" tab and click on the links to get just about any info you need. If you need help just ask. Good luck.

Posted on Jan 23, 2009

c17hydro
  • 2984 Answers

SOURCE: Ford Taurus 1999SE-Windshield wiper motor just hums.How to fix ?

Removal & Installation To Remove:

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the battery ground cable.
  3. Remove the wiper arms.
  4. Remove the 8 plastic retainers and the 6 clips holding the cowl vent screens to the inner panels. Turn the retainers 1⁄4 turn counterclockwise to remove.
  5. Remove the cowl vent screens.
  6. Disconnect the electrical connector from the wiper motor and remove the 4 bolts that mount the module assembly to the cowl.
  7. Remove the windshield wiper module from the vehicle.
  8. Rotate the wiper operating arm in a clockwise direction to gain access to the bolt retaining the arm to the motor. WARNING
    Always rotate the wiper operating arm in a clockwise motion or damage to the motor could occur.
  9. Remove the nut retaining the wiper operating arm to the wiper motor.
  10. Remove the three wiper motor-to-wiper module assembly retaining bolts and remove the motor from the vehicle.
To Install:
  1. Position the wiper motor on to the module assembly. Install the three wiper motor-to-wiper module assembly retaining bolts. Tighten the bolts to 115-151 in lbs (13-17 Nm).
  2. Position the wiper operating arm on the wiper motor output shaft. Install the mounting nut and tighten to 22-29 ft-lbs (30-40 Nm).
  3. Position the windshield wiper module onto the cowl. Install the mounting bolts and tighten to 106 in-lbs (12 Nm).
  4. Connect the wiper motor electrical connector.
  5. Position the cowl vent screens onto the inner panels. Install the 8 plastic retainers and the 6 clips holding the cowl vent screens to the inner panels. Turn the retainers 1⁄4 turn counterclockwise to install.
  6. Install the wiper arms.
  7. Connect the battery ground cable.
  8. Adjust wiper arms if necessary.

Here is the picture of the motor....it is the round object in the middle of the picture that looks like a can and has a square block on the end of it.

You have to remove the cowl vent panel....just under the windshield. $64.00 for a new motor.

Posted on Oct 01, 2009

Testimonial: "Fast and accurate response."

wireguy212
  • 1627 Answers

SOURCE: 2007 edge has windshield washer sprayer hose broken

You can pick up new splices or tee's at any parts store out of their repair kit,just take one with you when you go for reference.

Posted on Jan 28, 2010

  • 172 Answers

SOURCE: ford taurus v6 duratec vacuum hose diagram

under the hood is a vacum diagram

Posted on Apr 16, 2010

bayyagg
  • 1672 Answers

SOURCE: Windshield washer hose is leaking

Hi,
Don't spend your time removing something that is not relevant to the problem.
The hose can be pulled easily from underneath of that washer reservoir.
First thing is to find out why the washer fluid leaks, look for the cause of the leak.
If the leak is in the reservoir, just remove the reservoir and check it.
If the problem is in the hose line, remove the hose from the "Y" connection between the two washer nozzle and pull the hose from the main outlet of the tank washer.

Hope that clears up everything!
Thanks for using Fixya!

Posted on Dec 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windshield washer leaks fluid


It MIGHT just be a hose or seal where washer pump connects to tank. If those are good you'll need to replace reservoir.

Feb 27, 2011 | 2002 Ford Taurus

1 Answer

Windshield washer line came undone i cant find wher to hook it back up


The washer fluid pump is going to be mounted on the firewall it will have places for 3 tubes one intake and two going out to the spray nozzles the spray nozzles are either fixed pointing up at the windshield or if they are on the wiper itself there will be a place at the base of the wiper to connect the hose

Sep 02, 2009 | 2004 Ford Taurus

1 Answer

Windshield washer hoses, have cracked


yes you can but why not just buy enough hose and replace the entire

line?

Mar 27, 2009 | 1998 Ford Taurus

1 Answer

Need to remove windshield washer resevoir


If you here the pump working check the hose to windshield to see it was pinched when closins the hood .I fixed mine wih black electrical tape and it works fine for now.

Mar 07, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2004 Ford Taurus Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...