Question about 1997 Mercury Grand Marquis

1 Answer

Code p0304 misfire e 320 mercdes 1997 when you start car vibrates and when you are at stop sign. solution please

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 74 Answers

A code P0304 may mean that one or more of the following has happened: Faulty spark plug or wire Faulty coil (pack), Faulty oxygen sensor(s), Faulty fuel injector, Burned exhaust valve, Faulty catalytic converter(s), Running out of fuel, Poor compression, Defective computer.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs/wires). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if equipped). Otherwise, check the coil packs. Sometimes the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your catalytic converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Posted on Oct 21, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 sienna with codes p0300,p0301,p0304 and p1150. Experience less power and a little vibration. Engine light flashes.

The p0300 codes are engine misfire codes cylinder 1 and 4 the light is flashing because misfires can damage the cat. Convertor 1150 is an o3 sensor code possibly an effect not a cause I would see if 1and 4 utilize the same ignition coil first

Feb 24, 2015 | Cars & Trucks

1 Answer

I have 1997 nissan altima with a P0304 code

you have a number 4 cylinder misfire code stored. may be spark plugs, wires, cap, rotor, injector, computer or harness issue. start with new plugs.

Jan 01, 2011 | Nissan Altima Cars & Trucks

2 Answers

Engine missing and shows codes P0304 and P0316

cylinder no.4 misfire detected

misfire detected during startup -first 1000 revolulations

Aug 21, 2010 | 2009 Ford F-150

1 Answer

Misfire in 97 voyager,P0300 and P0304,HELP! Need 2 get inspection

I'd have fuel pressure checked, and at the very least, replace fuel filter. Not unusual to get multiple misfire codes due to low fuel pressure, thus starving cylinder(s), and causing the misfire code(s).

Apr 23, 2010 | 1997 Plymouth Grand Voyager

2 Answers

Can you please explain what code p0304 cylinder 4 missfire means and how can I fix that thanks.

p0304 means the computer has detected that cylinder 4 is misfiring. the most common cause of a misfire is a faulty spark plug or plug wire. depending on how long its been since a tune-up, they could just be worn out. you can look at where the plug wire snaps onto ignition coil to see if the coil tower is corroded, also another cause. other causes of misfire in one cylinder could be a faulty fuel injector or low compression on that cylinder. but ignition is the most common

Feb 19, 2010 | 1997 Buick LeSabre

1 Answer

Code P0304. What exactly is this code telling me?

p0340 cyl 4 misfire /check plug /wire /distributor cap/ injector

Jan 13, 2010 | 1997 Mercury Grand Marquis

1 Answer

I have a 1997 Subaru Legacy that wouldn't the

Sounds like the coil is going. The crank sensor will fire the ignitor and fires 2 plugs at once. Have the coil checked first. Good luck.

Jan 05, 2010 | 1997 Subaru Legacy

1 Answer

2000 dakota 4.7 v-8 codes p0300 p0303 p0304 p0307

well the codes
p0300 multiple misfire
p0303 misfire cylinder 3
p0304 misfire cylinder 4
p0307 misfire cylinder 7

can be alot of things check cylinders for compression is what i would do first..

Jan 31, 2009 | 1997 Dodge Dakota

Not finding what you are looking for?
1997 Mercury Grand Marquis Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

76846 Answers


Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides