Question about 2004 Ford F150

1 Answer

I changed oil in my 2.4l sebring now misses - 2004 Ford F150

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 162 Answers

Make sure your oil level is correct, fill or drain if it's not correct. Did you spill any oil?

Posted on Oct 21, 2013

Testimonial: "no didn't spill"

  • 13 more comments 
  • taran
    taran Oct 21, 2013

    no didnt spill any oil oil level fine

  • mekanik84 Oct 21, 2013

    Then it is a coincident. Pull injectors or wires off while running to identify what cylindr and inspect olug

  • taran
    taran Oct 21, 2013

    it doesnt miss constantly and when driving it coughs

  • mekanik84 Oct 21, 2013

    And it didn't throw a cel?

  • taran
    taran Oct 21, 2013

    would changing to royal purple have something to do with it

  • mekanik84 Oct 21, 2013

    Absolutely not, what grade oil did you run?

  • taran
    taran Oct 21, 2013

    whats a cel do you mean cylinder

  • taran
    taran Oct 21, 2013

    5w/30

  • taran
    taran Oct 21, 2013

    i put e3 plugs in a while a go maybe ones going bad ill check tomorrow

  • mekanik84 Oct 21, 2013

    E3 plugs are garbage, stick to a cheaper ngk. Cel is a check engine light.

  • taran
    taran Oct 21, 2013

    no cel

  • mekanik84 Oct 21, 2013

    Get a scanner and monitor each cylindr in current data. Count misfires in each cylinder. You will prob need to take to a shop

  • taran
    taran Oct 21, 2013

    probably just plugs i will put new onesin tomorrow and use oreillys obd to see if any codes come up

  • taran
    taran Oct 21, 2013

    thank you very much for the help

  • mekanik84 Oct 21, 2013

    Good luck, pay attention to the plugs... They tell you everything you need to know about each cylinder

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does it mean when the oil light flashes on my 2006 sebring?


Low oil pressure. Causes: Old oil, bad oil filter, low oil level or even a bad oil pump.

Aug 26, 2011 | 2006 Chrysler Sebring

2 Answers

The engine starts missing after it warms up and on takeoff after a stop


starts missing after it warms up and on take off after a stop

May 23, 2010 | 1998 Chrysler Sebring

2 Answers

Oil Change on a 2006 Crysler Sebring


c41abf1.gif


this the picture of the where is the drain plug located

Mar 24, 2010 | 2006 Chrysler Sebring

1 Answer

I have a 2008 chrysler sebring. I just had the oil changed and the same light keeps coming on saying "change oil" how do i turn it off?


Try pressing the gas pedal all the way to the floor three times, be sure to turn the key to the on position with the engine off. Most oil change places should be able to do this for you.

Jan 21, 2010 | 2007 Chrysler Sebring Sedan

1 Answer

Oil sending unit on 2004 chrysler sebring V6


Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Jan 03, 2010 | 2004 Chrysler Sebring

2 Answers

Reset oil change message.


YOU TURN IGNITION TO RUN POSITION..ENGINE OFF..PRESS ACCELERATOR 3 TIMES WITHIN 10-15 SECONDS..RELEASE AND TURN KEY OFF..THEN START VEHICLE,IT SHOULD BE RESET

Jul 11, 2009 | 2008 Chrysler Sebring

1 Answer

Oil light on while driving 2002 Sebring


2.7 ? This motor has oil problems if not changed every 3000 miles. Put a chrysler filter on it and the correct weight of oil, never use a fram oil filter.

Jul 02, 2009 | 2002 Chrysler Sebring

1 Answer

Dodge ram50 1992 swap 2,4L to 2,6L


Greetings!

Yes, the engine mounts and bell housings are the same.
The swap should be straight forward, however be sure to swap all the vaccum controls and emission system from the 2.6L.

Have fun!
Cheers, Jay

Apr 29, 2009 | 1992 Dodge Power Ram 50

1 Answer

2002 Chrysler Sebring Oil pressure light


Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Mar 26, 2009 | 2002 Chrysler Sebring

1 Answer

Dodge Caravan 2,4l 1997 timing belt change


you will need to change the belt tencioner aswell
if you havent don a cambelt before dont see youre local mechanic ok m8

Jan 03, 2009 | 1997 Dodge Grand Caravan

Not finding what you are looking for?
2004 Ford F150 Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...