Question about 2006 Hummer H3

1 Answer

2007 h3 radio not working and display time and "phone". if battery is disconnected it comes back on then goes right back after turned off and started back up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 401 Answers

1st mistake: you didn't get an H1 lol
2: Most modern cars have an anti-theft device installed in the radio. That means if the battery becomes disconnected for ANY reason your radio won't work without a special code being entered. Your local Hummer dealership should be able to provide you with a code. The code is NOT the same for every vehicle.

Posted on Oct 21, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2009 Hummer h3 won't start

My H3 didn't start this morning. I noticed something unusual about my truck when I first tried. The alarm had a weak sound when it went off. The fact that it turned over but didn't start made me believe it was not the battery. I was trying to call the mechanic and a wrecker to get my H3 fixed. However, before that I got the wrecker out there, I went to Autozone. He told me it sounded like the battery and cold weather kills the battery. So 3 hours have passed and temperatures warmed up to a cool 56 degrees. I was going to put jumper cables but out of curiousity, I said well let me crank it and see if it was cold weather. Sure enough, it cranked right up.

Either way, I am going to take it to Autozone and have the battery checked. I can't miss another day of work due to an old battery.

Posted on Dec 29, 2008

  • 30 Answers

SOURCE: DOORS displays on DIC in 2007 Hummer H3. All

i beleive those have their own door switches in latch i would try to clean latches with spray brake kleen then blow out, lube with a spray lube like wd40 that may solve your issue. while your doing this remove negative battery cable so the ecm has to recheck doors system.

Posted on Mar 18, 2010

johnjohn2
  • 5763 Answers

SOURCE: I have 2007 H3 if

The body module controls many things it could be module or something that module controls, the best way to find the draw is to do what you did with the module, remove fuses from each system until you can pinpoint draw, if you had a battery draw tester you could watch the meter as you dissconnect each fuse until you see the draw go away.

Posted on Aug 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007hummer h3 will not start keep having to jump it


Charging system not working properly have your altenator checked

Aug 31, 2014 | 2007 Hummer H3

2 Answers

Locating the voltage regulator located on 2007 Hummer H3?


I don't have a shop manual for a Hummer.
But GM trucks built in 2007 use something other than the alternator to control voltage. Sometimes its called a generator control module and sometimes it is inside the body computer or the ECM.
You may need to check with someone who specializes in Hummers for the answer.

Feb 03, 2013 | 2007 Hummer H3

1 Answer

My hummer when I turn off the vehicle the p light is lite in a sec. or two it will move over to the 3rd gear mark and the radio comes on and the dome light also the doors unlock this keeps running my...


The drains are plugged or the drain tube is disconnected on the passengers side allowing water to run down the passenger side pillar or out the disconnected tube and the bcm is there in behind kick panel. Body control module. Try drying it out with forced air and maybe even heat. If no luck after that try hooking battery cable for a bit to reset as well. If nothing try the dealer and mentioned. The bcm and may be the problem. I have an 06 h3 and have had troubles with the sunroof drains before. I joined a drum and learned the cure.
1_14_2013_3_50_18_pm.jpg

Jan 11, 2013 | 2006 Hummer H3

1 Answer

Radio stopped working - battery & fuses are fiine


You were right for checking those two first, because they were most likely to be the points of failure. Seeing as you have checked them, i would look to see if the cable coming from your battery is making proper contact and that the wire is intact all the way to the console. This might take some time but it would be the only reason for the lack of power.

Oct 10, 2012 | 2007 Hummer H3

1 Answer

Radio display doesn't work


check the fuse if you short out your cig lighter it will cause your radio to loose total power

Sep 25, 2012 | 2007 Hummer H3

1 Answer

This morning when I attempted to start my 2006 Hummer H3, nothing happened. I thought I may have a dead battery but the lights and radio work fine. I then noticed the Passlock security lock light was on...


Hello:Try this procedure: turn key on, turn to start, let key come back to on wait ten minutes, turn key off wait 10 seconds turn key back on wait 10 minutes. turn key off wait 10 seconds turn key back on wait 10 minutes turn key off wait 10 seconds NOW try and start. In addition you might try tapping on switch assembly while trying to start. There is not any way to disable passlock. You might try having the engine control system codes read

Feb 01, 2011 | 2006 Hummer H3

1 Answer

How i can get a code for radio honda odyssey 2007


Your car’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific five-digit code in the Preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.
You should have received a card with your manual(if you have one) that lists your audio system’s code number and serial number. If you don't have the card, you can get the code number from your Honda dealer, but to do this, you will need the system’s serial number. (you can try the following to get the serial number, but I don’t know if it will work.
To access the serial number, turn the radio on. It must display ‘‘CODE’’, then turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.)

If your car’s battery is disconnected or goes dead, or the radio fuse is removed, the audio system will disable itself. If this happens, you will see ‘‘Code’’ in the frequency display the next time you turn on the system. Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.
If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.
Hope this is helpful.

Nov 10, 2009 | 2007 Honda Odyssey

1 Answer

07 h3 navigation


It is actually located behind the navigation screen.

Turn off the radio.
Press and hold the CD eject button until the display unlocks (about 10 to 15 seconds).
Let screen move outward and rotate downward.
Press the DVD eject button just exposed behind the display.
Remove DVD, insert new one.
Rotate display upwards and press gently on all four corners to slide and lock display back into original position.
Turn on radio, navigation DVD should start update process, let it finish.

Jan 29, 2009 | 2007 Hummer H3X

3 Answers

2009 Hummer h3 won't start


I can't get my hummer to start! put in a nwe battery and starter and it still will not crank!........ when I turn the key I get nothing.......

1 could it be the init.switch
2 or some other issue

Dec 29, 2008 | 2006 Hummer H3

2 Answers

'03 Honda Accord won't recognize CD player after battery replaced


I have a crv also. the audio system has an anti-theft mechanism, to deter thieves from stealing your cd player/radio. you need a code to turn your unit back on, usually a four or five digit code, that should have been provided when you bought the vehicle. If you don't have it, the unit will come back on after, and only after a full, uninterupted hour of driving.

Dec 22, 2008 | 2007 Honda CR-V

Not finding what you are looking for?
2006 Hummer H3 Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...