Question about Cars & Trucks

1 Answer

Vacuum Diagram there are two 5/16 nipples under throttle body of 98 kia sportage and i don't know where the hoses go to

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Check with your local parts store they should be able to get you a diagram

Posted on Oct 20, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 261 Answers

SOURCE: 3T-C VACUUM HOSE DIAGRAM OR INSTRUCTIONS

USUALLY ANY TOYOTA DELER what you have to ask for is a emission routing diagram

Posted on Nov 24, 2008

ginko
  • 19396 Answers

SOURCE: Vacuum hose diagram

The rubber vacuum hose comes off the intake manifold inside the engine compartment.
The vacuum lines are located on left side fender, under the hood.
If you look facing motor you will see tehm on the right side.

Posted on Mar 15, 2009

michigan man
  • 3533 Answers

SOURCE: need picture diagram of vacuum hoses for 1987 chevy s-10 blazer

try this website to see if they have your car listed its www.autozone.com if you are not able to get it try your local library or local chevrolet dealership in the parts department

Posted on Apr 27, 2009

ginko
  • 19396 Answers

SOURCE: Cannot identify leaking vacuum hose.

Follow the complete instructions here.

Posted on May 07, 2009

  • 1 Answer

SOURCE: Vacuum hose routing.

The emissions sticker does not show this hose.
This is a rubber hose that appears to have been attached to a port at some time.

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 84 porsche 944 where do the vacuum lines go to on the fuel rail 2 regulators. Where do they connect from regulators to where?


If it's not a turbo, the vacuum lines for the damper and regulator go to the vacuum nipple on the throttle body that is underneath the assembly and on the manifold side of the throttle plate. The other vacuum hose that is connected there is ported, on the non manifold side of the plate. If it has vacuum when the throttle is closed, it is on the manifold side. You'll need a vacuum tee to join them into one hose to connect to throttle body nipple.

Jul 21, 2015 | Porsche Cars & Trucks

1 Answer

Vacuum hose


I never heard of a vacuum line going from the throttle body/intake manifold before but I have never worked on a Kia. Disconnect the hose at both ends have some one take you to ace hardware they have automotive vacuum hose by the foot bring your old hose with you so they can cut the proper length and girth of your original hose and pop the new one back on. It might be hard to fit the new hose back onto their fittings i usually lightly oil the surface that the hose goes over with engine oil so it goes on pain free remember lightly oil. good luck.

Mar 27, 2014 | 2001 Kia Sportage

1 Answer

Cruise control diagram 99 kia sportage


there is a vacuum control under the hood of the car usually on the drivers side and will have the throttle cable attached to it.. so follow back from the tbi near the air cleaner and you will find it..usually a round metal peice mounted with a rubber side that will flex back into itself and pull on the gas linkage to hold the speed of the car..some have moer than ne cable on them and a connector on the back with a vacuum hose connected also(or plastic tubing) check for movement and is the connection tight..repost findings...

Jan 20, 2013 | 1999 Kia Sportage

1 Answer

How to fix code P0505 code on 2000 kia sportage?


P0505: Idle Air Control Valve System fault, Code P0505
-Vacuum leak
-Dirty throttle body
-IAC motor defective
-Poor electrical connection to the IAC valve, hope this helps and good-day !

Mar 29, 2012 | 2000 Kia Sportage

1 Answer

Can not find where the 2 hoses go underneath the throttle body on my kia sportage 2000 need to find out where they go please help!


are they coolant hoses? if so they should attach to the line around the idle control valve.

Jul 30, 2011 | 2000 Kia Sportage

1 Answer

Looking for vacuum system diagram for a 1995 Jeep wrangler? Specifically, the MAP sensor.


Map sensor should be a single hose from the sensor to the intake manifold. On the newer ones they attach the map to the throttle body with a short nipple between the sensor and the TB base, eliminating the hose..

Nov 23, 2010 | 1995 Jeep Wrangler

3 Answers

2000 Sportage: where is the spark plugs located on a 2000 Kia Sp...


They are under the black plastic cover that is in the middle of your valve cover gasket. Remove the intake hose from the aluminum intake plenum on top of the valve cover and the silencer box against the firewall. Remove all the connectors from the sensors which should be 2 on the plenum and the 2 large vacuum hoses on the plenum. Then remove the 3 12mm bolts from the plenum at the throttle body and remove the plenum. You can reuse the throttle body gasket at the plenum so don't destroy it. All the other bolts are 10mm and use a screwdriver to loosen the clamps on the hose. The sensors have clips that you need to remove with a small screwdriver, then disconnect them. Remove the bolts on the cover and the cover. Then remove the bolts holding the coil packs down. Do one plug at a time. 2 of them are connected to the 2 plug wires and 2 are underneath the 2 coil packs. The connectors on the coil packs are fragile so remove them carefully. Reverse the steps to reinstall the plenum, etc.

May 16, 2010 | 2000 Kia Sportage

2 Answers

Trouble code po171 for engine running lean


where the hell do i find a 1996 ssangyong musso vaccum hoses diagram that is readable because i have the work shop manual and it shows me bugger all

Dec 17, 2009 | 1999 Kia Sportage

1 Answer

98 kia sportage when in nuetral revving up and when in park


It is probably a faulty Throttle Position Sensor. Also double check any vacuum lines for cracks or tears.

Jul 03, 2009 | 2002 Kia Sportage

4 Answers

Vacuum hose diagram


The rubber vacuum hose comes off the intake manifold inside the engine compartment.
The vacuum lines are located on left side fender, under the hood.
If you look facing motor you will see tehm on the right side.

Oct 30, 2008 | 2002 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...