Question about 2006 Chrysler Town and Country
First off check your Coolant level. If it is low, you will not get any, or you may get a little heat. If the Coolant level is good, you will need to check, or have someone check to see if you Thermostat is stuck open. If Thermostat is working properly, then your heater core must me suspected of being blocked . Have someone back flush the cooling system with a chemical flushing additive. If this gets you some heat, but not as good as it should be, replace the heater core. Hope this helps.
Posted on Oct 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I work for a brake repair shop and trust me you are not alone.Enterprise and alot of other people bought the same van and had the same trouble.I hate to say but it doesnt stop there.About every 14 to 15 thousand miles you have to replace the front pads.As of now they dont have an upgrade,for instance ceramic pads, but I am sure they will very soon
Posted on May 01, 2009
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
you need to remove the drive belt and alternator to access the egr valve. when replacing the torque on the bolts is 23 foot pounds
Posted on Jan 30, 2011
Tips for a great answer:
Nov 20, 2015 | 2006 Chrysler Town and Country
Mar 26, 2015 | 2010 Chrysler Town and Country
Dec 31, 2012 | 2006 Chrysler Town & Country
Aug 13, 2012 | 2006 Chrysler Town & Country
Jul 18, 2012 | 2006 Chrysler Town & Country
Jul 24, 2010 | 2006 Chrysler Town & Country
Sep 23, 2009 | 2006 Chrysler Town & Country
Jan 09, 2009 | 2006 Chrysler Town & Country
Dec 11, 2008 | 2006 Chrysler Town & Country
270 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: