Question about Honda CR-V

1 Answer

Where is water pump fuse located - CR-V Honda Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 260 Answers

If your water pump has failed you will simply just have to change it.It does not have a fuse and a rule of thumb is change the water pump when you change the timing belt at 60000 which is the correct interval to change the timing belt and you already have easy access to change the water pump also.

Posted on Oct 20, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1967 E type Jaguar fuse box location


The fuses are located behind the gage panel.

Jun 16, 2017 | Jaguar Cars & Trucks

1 Answer

Help. ive got a wiper system that doesnt let the water thru, can anyone tell me where the pump/ fuses etc are located on a daewoo matiz thank you...kt


The pump is located on the washer reservoir. The fuse boxes are located under the hood (usually near the fender wells) and in the dash (usually under the steering wheel and next to the drivers door.

Jan 17, 2012 | Cars & Trucks

1 Answer

Code 410


code po410 on a 2004 gmc envoy is that there is a problem with the secondary air injection system, you will need to check the fuse located in the engine compartment first, the next step is to start the truck cold and listen for the air pump to turn on for a few seconds, this will sound like a jet engine but not that loud, after it runs for 5 min and you dont hear it then you may have a bad pump which is located under the driverside on frame but if you hear the pump then you may have a bad valve, this valve is located on the exhaust manifold area and has a hose from the pump to valve, remove the hose and check for water, drain any water in the hose, also remove hose at pump and drain, the most common cause for this code is the valve is not opening and the air pump gets water inside and goes bad, thats the po410 code. a quick note; if fuse is blown look under truck near pump and check relay as it fills with water and blows fuse, if this is the case replace relay and blow water out of connector.good day.

Dec 06, 2011 | 2004 GMC Envoy

1 Answer

How did i find the water fluid pump fuse or relay,volkswagen cabriolet 1992


Do you mean washer fluid or radiator coolant? If radiator coolant there is no fuse the pump in mechanical and turns off the engine. If its the washer fluid pump its fuse #11 and is a 15amp which is located under the left side of the instrument panel behind knee bar.

Nov 08, 2011 | 1992 Volkswagen Cabriolet

1 Answer

HI Dodge Caravan 2005 windshield water pump problem Where is it located and which fuse should I check Thanks, Andre


First of all, try to warm up the car to above 32 deg. F so that any ice may melt in the pump. Check that you have -20 deg. F windshield wiper fluid vs. the 32 deg. F fluid for the summer. Flush out any summer windshield wiper fluid. This will help to get it ready for winter which is already in full force.

If you still can't hear the pump humming or spinning, then try to replace the pump which is located in the plastic tank in most cases.

The fuse usually will not blow on the windshield wiper pump in my experience.

The pump either is frozen with water or is burnt out.

Dec 19, 2010 | 2005 Dodge Grand Caravan

1 Answer

I only have heat when accelerating, im told it could be the thermostat or water pump, where is the water pump located and is it fairly easy to do yourself


If your car is running hot it could be the water pump.. Is the fan blower blowing? If no check relay and fuse. If yes . Check water make sure it is full, thermostsat could be bad , last of all heater core is bad.Good Luck!!!

Nov 03, 2010 | 2004 Honda Civic

1 Answer

Ford focus 2000 w nowater getting to the window jets not blocked and they is water in the bottle is they a fuse in it


Yes there is a fuse. when you press in on the wiper lever you should hear a pump come on if no noise no power to pump or faulty pump. I think the fuse is located under the hood. but not sure, good luck

Mar 24, 2010 | 2001 Ford Focus

1 Answer

Winscreen washer failure


Before you change the pump make sure it is not something as simple as a fuse replacement. I was told that if the wipers still function then the system fuse (usually a 30A fuse) was not blown.

Here is step by step to get at washer pump

1. Remove drivers side front wheel 2. Remove inside fender wheel well covering (about six to eight screws) 3. Upon removing cover you will note to left of wheel the plastic washer reservoir. Located behind this reservoir are the pumps. 4. Unscrew reservoir bolts and pull reservoir loose from grommet at top of fill container. Also at this time you can now disconnect the water level sensor plug that plugs in to the left side of the reservoir 5. Pull reservoir out and you can now locate pumps. If the pumps are bad, this is an easy fix of disconnecting the electrical connects, disconnecting the water lines and pulling th pump out of the reservoir fitting. 6. Replace new motors and reassemble in reverse order.

Nov 04, 2009 | 1998 Audi A4

1 Answer

2005 jeep grand cherokee


The washer pump is located on the washer bottle. Must check for power at pump when applying switch if no power (12 volts) check fuse or curcuit. If it has power replace pump. Also: if pump is operational check hoses for resteictions.

Jun 13, 2009 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...