Question about 2003 Ford Focus

1 Answer

Hi. We have a 2000 ford focus se, we changed the horn, fuse is good and relay is good.Changed the horn pad,worked for one day,horn sounds when we locked the car with the key fob.but not with the horn pad.Any suggestions. thank you. Bev and Stephane.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 20,706 Answers

Can be lots of things.
1: fuses. blown (always 1st)

keep in mind some cars, have 2 horn relays
1 for keyless entry sys.
1 for horn button

if the button fails i can be the button is bad, or the wires from it to the relay is bad,
the wiring is simple (steering wheel with air bags are dangerous and complex)
but alldata.com has the drawings. and even how to fix it.
under AIRBAGS (defeat ) 1st
then under HORN
its all there all the time.
i never assume what is wrong, i do the tests.
i check the signal at the correct relay first , the follow the fail path
to its logical conclusion. i dont guess. and for sure i never put
my BODY near any active air bags, ever. nor should you.
if you need to know the exact location of parts. i can look it up.
its at alldata.com

Posted on Oct 20, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: how do i reprogram my02 ford focus remote locking key fob please.

get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt

Posted on Nov 27, 2008

  • 30 Answers

SOURCE: 2002 Ford Focus Doors lock with key fob, but horn does not honk

there are two seperate horns

Posted on Mar 11, 2009

emissionwiz
  • 75235 Answers

SOURCE: key fob not working after battery change ford focus 2006

Try reprogramming it.

1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
2. Turn the ignition OFF. The system will chime to confirm programming mode.
3. Within 20 seconds, press any button on first keyless remote.
The system will chime once to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.
System will chime once to confirm programming.

5. Turn ignition to RUN to exit programming mode.

Posted on May 28, 2009

  • 94 Answers

SOURCE: ford focus rs alarm trouble

if its a factory alarm you put the key in and quickly turn the key on and of i cant remember if its 8 or 9 times but the horn will chirp then you push the lock and unlock on the fob the locks should respond then turn key off and your done. note that if you have more than one fob you have to press lock and unlock on all of them before you turn the key off and i believe you only have about fifteen seconds to do so if not let me know i will look it up at work

Posted on Sep 14, 2009

  • 274 Answers

SOURCE: I have 2001 ford focus se, 130,000 my power locks

yes there is if you drop down the glove box lid and remove the bolts holding the fuse box. unclip the fues box and pull it down. turn the fuse box around and there is a fuse on the back (i thing its a 15amp)
this is the other fuse for the central locking.

please let me know if this helps
cheers
big mike :)

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 VW golf horn won't work, fuse is good , relay 53 is good but changed it anyway. No voltage reading at horns. Tested horn off car and it is fine


Did you check the power to the relay? and then the signal wire (ground) at the relay to see if it's being signaled? Otherwise you may have a clockspring or module problem not allowing the signal to pass through to the relay.

Dec 15, 2012 | 2000 Volkswagen Golf

1 Answer

Horn not working


The problem is likely the rotating coiled ribbon contact under the steering wheel called the "Clock Spring" Always disarm the Airbag system before starting any work on the system.

May 31, 2012 | 2004 Hyundai Elantra

2 Answers

Power locks, windows, and horn do not work on 2002 ford focus se


Owner's manual should have a diagram of the fuse panel. Need to find which fuses control these items and check the fuses.

Dec 04, 2009 | Ford Focus Cars & Trucks

1 Answer

2000 ford focus se wagon, brake light on dash comes and goes. Brakes pads are good, fluid is at the correct level.I haven't checked or changed any switches yet.


does it have spongey petal ? if so it needs to be bled. check the emerg brake switch it can cause that light to come on.

Aug 04, 2009 | 2000 Ford Focus

2 Answers

Where is the horn fuse or relay for 2000 ford focus?


fuse for horn is in the fuse panel drivers side lower part of dash

Mar 23, 2009 | 2000 Ford Focus

1 Answer

Central locking on Ford focus 1.4 W reg 2000


hi i would start by checking if there is a relay, it seems that there is a delay on the pressure pump that is supposed to shoot the door pins up.

Feb 05, 2009 | 2000 Ford Focus

1 Answer

Horn stopped blowing


Sounds like you may have corroded terminals on the horn itself.

Find the horn in the engine compartment - remove the wire connected to it - clean the spade terminal with some sand paper and push the terminal back on. If that doesn't work you may need to remove the horn from the car and clean up the earth connection, i.e. where the horn is attached to the body work of the car to get a good electrical contact.

Aug 22, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2003 Ford Focus Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...