Question about Pontiac Sunfire
new or used stereo
what model, and number# (stickers on rad)
if you post these facts. we can answer in exact details.
Audio systems can be simple to complex today.
nobody here ,can guess what you bought or found ?
not now or ever, or even double posted.
Posted on Oct 20, 2013
Testimonial: "its new dual xdma460"
If the unit is powered on then your problem is in the output. Check your aftermarket harness to the speakers. If you did not buy a harness then something is wired incorrectly. A good way to check which speaker is which is buy using a AA battery. Simply touch 2 leads to the positive and negative of the battery and when you have a correct connection the speaker will make a hissing sound.
Posted on Oct 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did you use a special wire harness? GM connected some computer system wiring with the stereo system, so if you replace this, there will be no chime when you open your door with the headlights on or keys in the ignition...and some other warning stuff. This special harness can be bought, but it is expensive (around 80-150$). Go to electronics store and ask for one. Anyways, hope this helps.
Posted on Mar 02, 2009
you have to get the cable that conects your factory deck harness to the aftermarket deck, and that will allow you to use your factory speakers and amp, the wire harness is availiable at canadian tire or any stereo shop
Posted on May 06, 2009
coolant temperture sensoris most likely your issue but before buying this part and installing, i would check all fuses and relays first.
Posted on Aug 11, 2009
Pontiac 2000 Bright Red code is WA8774
Here's a link to the color code chart...
Posted on Oct 14, 2009
Your thermostat is located under the thermostat housing, which is what the upper radiator hose clamps to on the top of your engine. Basically, you need to start with a cold engine, drain your radiator, then unclamp the upper radiator hose from the engine. Remove the bolts from the thermostat housing, and gently tap on it to remove it. clean up the mounting surfaces on both the engine and the housing, and install a new thermostat, and new gasket. tighten to proper torque, reconnect the radiator hose, then refill up the radiator and cooling system.
Posted on Nov 24, 2009
Testimonial: "Thank you, very helpful"
Tips for a great answer:
Oct 30, 2016 | Pontiac Cars & Trucks
May 12, 2015 | 1999 Pontiac Sunfire
Oct 20, 2013 | Pontiac Sunfire Cars & Trucks
May 02, 2013 | 2000 Dodge Ram 1500 Truck
Feb 12, 2012 | 2000 Pontiac Sunfire
Aug 05, 2011 | 2002 Pontiac Sunfire
Jan 20, 2010 | 2000 Pontiac Sunfire
Oct 29, 2009 | 2000 Pontiac Sunfire
May 05, 2009 | 2001 Pontiac Grand Am SE
Nov 14, 2008 | 1997 Pontiac Sunfire
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: