Question about Mitsubishi Cars & Trucks
I would not feel insecure using hydraulic oil for rams and jacks as those items need to be reliable, scoot down to your auto parts store and grab a bottle, remember to fill with rams compressed. hope this helps.
Posted on Oct 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 7 screws all together to remove the door pannel. First, you have to take off the hanlde for the door. the 2 plastic covers on the handle pop off revealing 2 screws on the top and bottom, remove those. then behind the the door handle on the inside, pull it as if you were to open it and there is a screw that you have to remove. Then there are 2 screws on either side of the door pannel, both are farily close to the top, remove those, and then its just a matter of popping the pannel off. start from the bottom, pop it off then slide it up. becarefull, after the door panel is free, there is a connection for the power doors and windows unhook that then the pannel will be free. after that the speaker will be right there and its common sense on removing that. good luck.
Posted on Apr 02, 2009
There are 2 motors in the back located behind the speaker pannels on each side of the back seat. fist make sure they are both working. second there is a switch inside your trunk on the drivers side loceted behind the trim pannel to the tail light to switch from motors to manual top removal. third if your still lost the suport bar closest to the front of the top (not the one against the window with the clips) but the silver one has 2 smal black piviting bars on each end that sometimes get stuck try manualy removing the top and pushing that bar to the back of the car. Hope this helps you
Posted on Jun 14, 2009
If you lower the back seat you will see a plastic cover on the botom of the opening. Remove the cover (6 appolstry fasteners) to reveal a metal box. The box is not actually a box but a cover for the hydrolic pump. Remove the fscrews from the lid and lift. The resevouar is clear and easy to check against the two fill lines on the side.
Posted on Sep 20, 2009
Well, replace the offending unit, then bleed the air out of the system...Sometimes you have to remove components and invert them to get all of the air out.
Posted on Apr 28, 2010
Tips for a great answer:
Apr 03, 2016 | Mitsubishi Eclipse Spyder Cars & Trucks
Aug 01, 2012 | Cars & Trucks
Nov 13, 2011 | Cars & Trucks
Aug 12, 2011 | 2007 Mitsubishi Eclipse Spyder GT...
Jun 12, 2010 | 2002 Maserati Spyder
Nov 18, 2009 | 2007 Mitsubishi Eclipse Spyder GT...
Nov 11, 2009 | 2007 Mitsubishi Eclipse Spyder GT...
Oct 27, 2009 | 2007 Mitsubishi Eclipse Spyder GT...
Nov 18, 2008 | 2003 Mitsubishi Eclipse Spyder
247 people viewed this question
Usually answered in minutes!