Question about 2006 Hyundai Tucson
Sounds like you have multiple problems for the heater, you need a blower motor resistor. Do you have auto light function? If not your switch is most likely on its way out
Posted on Oct 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a tsb for the brake switch in 06 sonatas. it must be adjusted or replaced by dealership. is your check engine light on, if so its probably code p0504
Posted on Jun 29, 2008
Check the coolant level, do this with a cold engine. Or if you have recently used it. let it cool down for about 25 minutes before removing the radiator cap. if it is low, refill with coolant. If it does not, check your thermostat. Or better yet replace your thermostat. Be sure to get the right one . the same degrees as your old one. Just ask the teller to give you one for your engine size and car Model.And year.See where the radiator cap is. Then drain some coolant to where it will not spill from the radiator cap. Remove the hose nearest the radiator cap and you will get to the thermostat housing. Remove the housing and note how the thermostat is placed. Take of the thermostat housing and the old thermostat. Clean the housing and around the hole where the thermostat goes of any deposits. Get some grease and cover the new gasket with grease on the housing to hold it in place. replace the New thermostat and make sure it is flush with the engine and the housing. If it is off , you could break the housing upon tightening the housing.replace the hose and refill with coolant slowly to eliminate any air spaces.. Also check the coolant reservoir and fill it to the indicator line. Restart the car and chek for any leaks. Then check the heater after the engine heats up. If that does not do the job it could be the temperature sensor or the heater core.The heater core will take more time to check and clean or replace.
Posted on Nov 26, 2008
dear friend-your vehicle need to be hooked up to a HI-SCAN-PRO or GDS in order to read your fault codes.only if you have a fault code will you be able to carry out any repairs.
Posted on Jul 18, 2009
Tips for a great answer:
Jan 13, 2014 | 2006 Hyundai Tucson
Dec 15, 2013 | 2006 Hyundai Tucson
Apr 20, 2010 | 2006 Hyundai Tucson
Mar 04, 2010 | 2006 Hyundai Tucson
Sep 28, 2009 | 2001 Hyundai Tucson
Jul 05, 2009 | 2006 Hyundai Tucson
Mar 08, 2009 | 2006 Hyundai Tucson
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: