Question about Toyota ECHO
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Be there done that, but with a penny. All you can do is either get real aggressive with a hammer and long metal object as a punch or pull the seat. The seat should have 4 bolts. One at each end of each track. Ising a 1/4 in drive rachet and either a 1/2 or 9/16 socket should work. 1/4 in drive is low profile.. good luck
Posted on Jun 02, 2009
I'm assuming you have manual adjustment seats. There is a spring underneath the seat that locks the end of the lever into corresponding notches in the seat frame rail. That spring has either fallen off or broken.
Posted on Jan 22, 2010
HI. There are only two causes for this particular issue. The most common will be a failed switch assembly. This should be located on the side of the drivers seat. This switch is responsible for transferring the movement commands to the actual motor/gear assembly, which is located on the rail structure under the seat in question. If your lumbar section is responding to commands, but the others fail, this will lead to a failed switch circuit. the entire switch board will need to be replaced, in this case.
Now, if you command the set to move forward, and all you hear is the motor running , but no movement, this will lead to a failed gear assembly. This will be the second cause of no forward/backwards movement. In this case, the entire motor/gear assembly will need to be replaced, due to the fact that the gears are not sold separately. The are shipped as a kit with the motor.
It is required that you order this type of replacement part directly from the dealership.
Posted on Mar 26, 2010
No the adjusters for power seat are made from some steel and a lot of aluminum parts. Replacing the seat tracks are your only option to be safe for they are riveted together
Posted on Apr 03, 2010
This is not necessary...as many have stated...use a hammer with switch in reverse position. Hammer the seat back...it will catch...
Posted on Aug 07, 2011
Tips for a great answer:
Oct 02, 2015 | Seat Cars & Trucks
Sep 11, 2015 | Seat Cars & Trucks
Apr 03, 2014 | 1996 Honda Accord
Jan 27, 2013 | Cars & Trucks
Jul 14, 2012 | 2005 Honda Accord
May 21, 2011 | 2000 Saturn SL
Aug 25, 2009 | 1992 Toyota Camry V6
Apr 03, 2009 | 1998 Chevrolet K1500
Dec 29, 2008 | 2004 Infiniti QX4
Jul 10, 2008 | 1997 Nissan Pathfinder
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: