Question about Ford F-250

Open Question

Need to know how to adjust the rear brakes on a 1997 ford f-250hd .

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1997 p reg ford escort

Not a solution per se but correction. 97 escort rear drum brakes do not use a STAR ADJUSTER. They use a "quadrant" adjuster attached to emergency brake cable I think. You'll see it coming out the back near top of backing plate. I don't think you can adjust them at all until drum is off. They are self adjusting once reinstalled.

Posted on Feb 02, 2009

  • 1779 Answers

SOURCE: Are the rear drum brakes on 1997 stratus self adjusting or manual

It should be self adjusting (when u back up and apply the brakes, it adjusts ), and can also be manually adjusted (thru removal of the rubber plug on the backing plate). The adjuster (star wheel) can seize due to rusting and it won't adjust automatically or manually. Whenever u do a brake job, spray it w/ wd-40 and turn it back and forth several times to make sure it is free, then I put a dab of high temp. brake grease on the threads (only a small amount, as u don't want it dropping off and getting on the brake shoes).

Posted on Mar 23, 2009

  • 5 Answers

SOURCE: replace rear brakes adjust handbrake

The hand brake hardly ever needs ajusting. See your hand brake mechanincly spreads your rear brake shose inside the drum. Therefore just replace your rear shoes and make sure there ajusted right and you should have no more problems with that part of your car. PS make sure you put some 3M paste on the contact points on your backing plate to avoid a squeak in the near future.

Posted on May 16, 2009

  • 70 Answers

SOURCE: how do I adjust emergency brake cable on 1999 ford

FIRST adjust rear brake starwheel while spinning tire FOWARD. then alongside drivers side of car find emergency brake cable adjustment (long threaded rod with nut) . hold one end of rod with vise-grips and turn nut until emer. brake cable has less slack in it. now go inside car and apply e-brake.you dont want the pedal to stop right away but u also dont want too much"travel" in the pedal.so about halfway is IDEAL. IMPORTANT- once the brake cable is adjusted and the car wont roll foward in gear with the brake on and applying a little "gas"-make sure with brake OFF that rear wheels turn freely. hope this helps.

Posted on Aug 31, 2009

duane_wong
  • 6826 Answers

SOURCE: 1997 ford escort brake line diagram

The LF and RR are in an independent circuit of the RF, LR wheels. The master cylinder already has the lines hooked up in a way that if you trace the lines, you can make your own diagram.

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjust rear drum brakes


Please be more specific here -by rotor what are you refering too ,is this vehicle a rear drum brake or a drum brake inside a brake disk ,Sorry here but this is a international website and some of us use the queens english.Abeit it with a cockney accent loike geezer noiw waat i meeeen

Sep 30, 2013 | Ford Explorer Sport Cars & Trucks

1 Answer

1993 ford tempo rear brake adjustment: what is the proper shoe spacing to the drum? how do i know i have acheived proper spacing?


As with all modern fords rear adjustment is automatic so no need to measure.The only adjustment is on the handbrake this needs to be set so the rear brakes just come into contact.Thats it!!!

Jan 05, 2013 | Ford Tempo Cars & Trucks

1 Answer

How do you adjust the parking brake on the 1997 sable


they r a self adjusting cable....if ur sable has rear drum brakes then adjust the rear shoes...if it has rear disc brakes then u have a faulty rear brake caliper..the parking brake system is also inside the rear brake calipers

Jul 16, 2011 | 1997 Mercury Sable

2 Answers

What size torque bit to get brakes off? 1999 expedition


To front pads, tighten the caliper pins to 16-30 ft. lbs. (22-40 Nm) on 1997-98 F-250HD, F-350 and F-Super duty models. Tighten the caliper pins to 21-26 ft. lbs. (28-36 Nm) on the F-150, F-250, Expedition and Navigator. Tighten the caliper pins to 42 ft. lbs. (56 Nm) on the 1999-00 F-250SD, F-350 and F-Super Duty models.

To install the rear disc brake caliper onto the rear support bracket. Tighten the caliper retaining pins on the F-150, F-250, Expedition and Navigator to 20 ft. lbs. ( 27 Nm). Tighten the caliper retaining bolts on the 1999-00 F-Super Duty models to 27 ft. lbs. (36 Nm.)

Hope helps.

May 09, 2011 | 1999 Ford Expedition

1 Answer

How do I adjust the handbrake in 2000 ford explorer


parking brakes are self adjusting. I suspect you rear brakes are not self adjusting. too much clearance to the brake drum to brake shoes. May need to replace rear brakes and self adjusters. (hardware)

Sep 04, 2010 | 1997 Ford Explorer AWD

2 Answers

1997 Ford contour rear brake shoe replacment help.


Brake shoe removel:

Depress and turn the retainers for the hold-down springs and pins to remove them from each shoe. Slide the brake shoe assembly--including the shoes and springs--down so you can disengage the top ends of the shoes from the cylinder and tilt them to lift them past the retaining plate.

Unhook the lower retracting spring from the front brake shoe to disconnect it. Spread the shoes apart at the bottom to remove the adjusting screw, the screw's retracting spring and the adjuster lever. Remove the front brake shoe.

Pull the parking brake cable spring back with diagonal cutting pliers, grip the cable with the pliers without cutting it, unhook the cable from the parking brake lever and remove the rear brake shoe with the lever.

Disconnect the parking brake lever from the rear shoe by spreading the retaining clip with a screwdriver and removing the clip and its spring washer.
  • Step 4 Pull the parking brake cable spring back with diagonal cutting pliers, grip the cable with the pliers without cutting it, unhook the cable from the parking brake lever and remove the rear brake shoe with the lever.
  • Step 5 Disconnect the parking brake lever from the rear shoe by spreading the retaining clip with a screwdriver and removing the clip and its spring washer.

  • Read more: How to Change Rear Brakes on a 1997 Ford Taurus | eHow.com http://www.ehow.com/how_6123373_change-brakes-1997-ford-taurus.html#ixzz0u2xgUqun
  • Step 3 Unhook the lower retracting spring from the front brake shoe to disconnect it. Spread the shoes apart at the bottom to remove the adjusting screw, the screw's retracting spring and the adjuster lever. Remove the front brake shoe.
  • Step 4 Pull the parking brake cable spring back with diagonal cutting pliers, grip the cable with the pliers without cutting it, unhook the cable from the parking brake lever and remove the rear brake shoe with the lever.

  • Read more: How to Change Rear Brakes on a 1997 Ford Taurus | eHow.com http://www.ehow.com/how_6123373_change-brakes-1997-ford-taurus.html#ixzz0u2xdByQ8

  • Step 2 Slide the brake shoe assembly--including the shoes and springs--down so you can disengage the top ends of the shoes from the cylinder and tilt them to lift them past the retaining plate.
  • Step 3 Unhook the lower retracting spring from the front brake shoe to disconnect it. Spread the shoes apart at the bottom to remove the adjusting screw, the screw's retracting spring and the adjuster lever. Remove the front brake shoe.
  • Step 4 Pull the parking brake cable spring back with diagonal cutting pliers, grip the cable with the pliers without cutting it, unhook the cable from the parking brake lever and remove the rear brake shoe with the lever.
  • Step 5 Disconnect the parking brake lever from the rear shoe by spreading the retaining clip with a screwdriver and removing the clip and its spring washer.

  • Read more: How to Change Rear Brakes on a 1997 Ford Taurus | eHow.com http://www.ehow.com/how_6123373_change-brakes-1997-ford-taurus.html#ixzz0u2xVyUAt

  • Step 2 Slide the brake shoe assembly--including the shoes and springs--down so you can disengage the top ends of the shoes from the cylinder and tilt them to lift them past the retaining plate.
  • Step 3 Unhook the lower retracting spring from the front brake shoe to disconnect it. Spread the shoes apart at the bottom to remove the adjusting screw, the screw's retracting spring and the adjuster lever. Remove the front brake shoe.
  • Step 4 Pull the parking brake cable spring back with diagonal cutting pliers, grip the cable with the pliers without cutting it, unhook the cable from the parking brake lever and remove the rear brake shoe with the lever.
  • Step 5 Disconnect the parking brake lever from the rear shoe by spreading the retaining clip with a screwdriver and removing the clip and its spring washer.

  • Read more: How to Change Rear Brakes on a 1997 Ford Taurus | eHow.com http://www.ehow.com/how_6123373_change-brakes-1997-ford-taurus.html#ixzz0u2xVyUAt

    Jul 17, 2010 | 1995 Ford Contour

    1 Answer

    97 ford f150 changed rear brake shoes but can not get rear drum to go back on over shoes, fells like something is keeping the shoes from giving so drum can go over


    Make sure the parking brake is not on, and that the brake adjuster is screw in all the way, adjust brakes after brake drum is on, from the back side on the backing plate, there will be a slot for adjustment, or you might have to knock out the tab, to be able to adjust brakes.

    Jul 16, 2010 | 1997 Ford F150 Regular Cab

    3 Answers

    ELECTRIC DOOR LOCKS ONLY LOCK SOME TIMES


    if you hit the lock button a couple times, will it finally lock?

    If so, then you will need to take door cover off and lube up the connectors as they probably got corroded.

    Aug 14, 2009 | 2000 Ford F350 Super Duty Super Cab

    1 Answer

    I need a schematic for the rear brakes on an F150 super cab with 4.6L automatic trans 4wheel drive


    Drum, Rear Brake System Standard Rear Brake
    9969082.gif
    Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 — Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 — Washer (2 Req'd) 4 — Anchor Pin (Part of 2211) 5 — Wheel Cylinder 6 2028 Brake Shoe Anchor Pin Guide Plate 7 2A637 Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 — Washer 12 2106 Parking Brake Lever Pin Retainer 13 — Brake Shoe Adjusting Lever Cable Guide 14 2A642 Primary Brake Shoe Parking Brake Lever Link 15 2A601 Parking Brake Link Spring 16 2068 Brake Shoe Hold-Down Spring 17 2A176 Brake Shoe Adjusting Lever 18 2048 Brake Shoe Adjusting Screw Socket 19 2047 Brake Shoe Adjusting Screw Nut 20 2041 Brake Adjusting Screw 21 2049 Brake Shoe Adjusting Screw Spring 22 2200 Rear Brake Shoe and Lining (Primary) 23 2A178 Brake Shoe Adjusting Lever Cable 24 2211 Brake Backing Plate
    Heavy Duty Rear Brake
    6dcb5d2.gif
    Item Part Number Description 1 — Rear Wheel Cylinder Retaining Bolt 2 00538 Lock Nut 3 2212 Rear Brake Backing Plate 4 2262 Rear Wheel Cylinder 5 2A642 Primary Brake Shoe Parking Brake Lever Link 6 2A601 Parking Brake Link Spring 7 2A637 Parking Brake Lever 8 2106 Parking Brake Lever Pin Retainer 9 — Parking Brake Lever Bolt 10 — Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 — Adjusting Lever Pin 14 — Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting Lever 16 2047 Brake Shoe Adjusting Screw Nut 17 2049 Brake Shoe Adjusting Screw Spring 18 2041 Brake Adjuster Screw 19 — Primary Shoe Assembly 20 2068 Brake Shoe Hold-Down Spring 21 2200 Rear Brake Shoe and Lining 22 2035 Brake Shoe Retracting Spring 23 2A178 Brake Shoe Adjusting Lever Cable 24 2092 Brake Adjusting Hole Cover 25 2069 Brake Shoe Hold-Down Spring Pin
    The rear drum brakes:
    • Have internal shoes that expand against the brake drum (1126).
    • Are a single-anchor type.
    • Are actuated by one rear wheel cylinder (2262).
    • Have two pistons in the rear wheel cylinder (2261). One exerts force against the upper end of the primary shoe; the other exerts force against the upper end of the secondary shoe.
    • Adjust rear brake shoes and linings (2200) automatically.
    • Need manual brake adjustment if the adjusters are not operating properly or after the rear brake shoes and linings have been replaced.
    When the brake pedal is applied, hydraulic fluid pressure forces the pistons in the rear wheel cylinder outward, moving the rear brake shoes and linings against the brake drum.
    The rear drum brake system includes the parking brake mechanism. Refer to Section 206-05 .

    Apr 04, 2009 | 1997 Ford F150 Regular Cab

    1 Answer

    Cabrio 1997 brake shoes (rear) adjustment


    There should be a rubber insert in the back of the wheel assembely,take it out and you can adjust the brake tighter or looser by turning the adjusting wheel

    Jan 15, 2009 | 2002 Volkswagen Cabrio

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5481 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...