Question about 2004 Land Rover FreeLander

Open Question

Remove engine Cover on 2004 Freelander - 2004 Land Rover FreeLander

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 land rover freelander idle air control valve location?


there is 2 valves and are located on the rear of engine on the left has you look from under the hood

Oct 13, 2017 | Land Rover Cars & Trucks

1 Answer

Key broke in barrel needs barrel out with the broken key 2004 freelander


remove the cover round your ignition you need a torch to see a slot in your lock push a small flat head screwdriver in the slot but you need to be able to then lift out the cylinder. you would normally do that with your key in the barrel.

Dec 23, 2013 | 2002 Land Rover Freelander

1 Answer

How to change spark 2002 land Rover freeLander


Open bonnet. On top of engine towards the front, is a head cover. Remove that. Remove with caution the HT cables. Get a long socket wrench for plugs and remove each one. Careful with grit that might fall into the piston sleeve. Replace sparks and button all up reverse of the removal.

Aug 20, 2013 | 2002 Land Rover Freelander

2 Answers

How to change land rover freelander fan belt


You have to jack it up and remove the underboady engine cover. Lower the vehcile and open the hood remove the engine cover. Use the jack to support the engine for underneath. you'll need to remove or swing the top passenger side engine mount. back off the tensioner from the belt. Auto Zone, Advanced Auto rents a tool if needed. Now you can change your belt!

Dec 29, 2010 | 2002 Land Rover Freelander

1 Answer

Where is the water pump and thermostat on Freelander Td4


down on the left hand side of the engine as you look at it a pig of a job to remove - 5 hours at least

Sep 18, 2010 | 2004 Land Rover FreeLander

2 Answers

I need to remove the fuel filter land rober 2004 freelander


changed my fuel filter yesterday,it can befound infront of the offside rear wheel attached to a plastic cover by to bolts,

Apr 04, 2010 | 2004 Land Rover FreeLander

3 Answers

I can only find three spark plugs on my freelander v6 engin


Remove
  1. Disconnect battery earth lead.
  2. Remove engine acoustic cover.
  1. RH bank only: Release locking clips and disconnect multiplugs from plug top coils.
  2. RH bank only: Remove 6 bolts securing plug top coils to RH camshaft cover and remove coils.
  1. LH bank only: Noting their fitted positions, disconnect ht leads.
  2. Using a 16 mm plug socket, remove spark plugs from both cylinder heads.
Refit
  1. Set gap of each new spark plug to 1.00 mm .
  2. Fit spark plugs and tighten to 25 Nm (18 lbf.ft) .
  3. LH bank only: Connect ht leads.
  4. RH bank only: Fit plug top coils to spark plugs.
  5. RH bank only: Fit bolts securing plug top coils to RH camshaft cover and tighten to 9 Nm (6.5 lbf.ft) .
  6. RH bank only: Connect multiplugs to plug top coils and secure with locking clips.
  7. Fit engine acoustic cover.
  8. Connect battery earth lead.

Jun 04, 2009 | 2003 Land Rover Freelander

1 Answer

Removal of the engine gaurd


unfortunatley there are about 10 bolt and screws to remove the aluminium guard along with the plastic--I have just done this and had trouble with siezed set screws--I have now split the unit so that when draining engine oil only the plastic shield is removed

Jan 11, 2009 | 2004 Land Rover FreeLander

Not finding what you are looking for?
2004 Land Rover FreeLander Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...