Question about 1998 Chevrolet Cavalier

Open Question

1989 chevy 2500 transfer case fluid capacity - 1998 Chevrolet Cavalier

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 400 Answers

SOURCE: what type/brand of transfer case fluid is recommended & quantity

Auto tek fluid, it's blue, you get at your dealer only. If you don't spill a drop you will only need 2 qrts. if you spill just a little then it won't be full and you'll end up needing 2.03 qrts.

Posted on Jun 19, 2009

Ad
  • 169 Answers

SOURCE: bolt to check transfer case fluid level

18 mm or 3/8 drv rachet dex III fluid or gm manual transmission fluid don't use dex VI

Posted on Aug 29, 2009

  • 142 Answers

SOURCE: 263 hd transfer case for 2002 chevy 2500

check this out it has it all http://www.merchant-automotive.com/263xhd.aspx

Posted on Sep 22, 2009

  • 142 Answers

SOURCE: fluid in a transfer case

if it is an electric shift t-case gm has there own oil not found at auto part stores

Posted on Sep 22, 2009

ZJLimited
  • 17970 Answers

SOURCE: what is the capacity of the transfer case and

GM Full-Size Trucks 1980-1987 Repair Guide

Transfer Case - FLUID RECOMMENDATIONS
The type of lubricant used in the transfer case varies with model year and type of transfer case. Refer to the list below for the type that applies to your truck.

1980
Conventional transfer cases require SAE 80W or SAE 80W-90 GL-5 gear lubricant.
Full time systems use SAE 10W-30 or 10W-40 engine oil.
1981
Conventional transfer cases require DEXRON®II transmission fluid.
1982-85
All transfer cases require DEXRON®II transmission fluid.
1986-87
All transfer cases except the K30/35 series require DEXRON®II transmission fluid.

For fluid recommendations for the K30/35 transfer cases refer to the owner's manual.
LEVEL CHECKS

fb6e8b4.jpg
Fig. Model 208 Transfer Case

Check the four wheel drive transfer case lubricant level every 4 months or 6,000 miles.

  1. With the truck parked on a level surface and the parking brake firmly applied, remove the filler plug from the rear of the transfer case (behind the transmission). Be careful not to take out the drain plug at the bottom.
  2. If lubricant trickles out, there is enough. If not, carefully insert a finger and check that the level is up to the edge of the hole, EXCEPT in full time four wheel drive cases should be 1 /2 in. below the hole.
Lubricant may be added, if necessary, with a funnel and tube, or a squeeze bulb.



DRAIN AND REFILL
Part Time Systems
No intervals are specified for changing transfer case lubricant, but it is a good idea for trucks that are worked hard or driven in deep water.
  1. With the transfer case warmed up, park on a level surface and apply the parking brake.
  2. Slide a pan of a least 6 pts. capacity under the case drain plug.
  3. Remove the filler plug from the rear of the transfer case (behind the transmission). Remove the drain plug from the bottom.
  4. Wipe the area clean and replace the drain plug.
  5. Add lubricant with a suction gun or squeeze bulb. Conventional transfer cases require SAE 80W-90 GL-5 Gear Lubricant.
  6. When the lubricant level is up to the bottom of the filler hole, replace the plug.
Full Time Four Wheel Drive
The full time system requires oil changes at regular intervals, according to the amount and type of work done by the unit. Trucks used for normal on-off road work should have the transfer case oil changed at 24,000 mile intervals. When used for heavy duty work, trailer towing, snowplowing, and the like, the interval should be halved to 12,000 miles. If the truck is exposed to extremely dusty or muddy conditions, the oil should be changed at 1,000 mile intervals.
The transfer case oil must be hot before changing. Drive the truck until the engine has reached normal operating temperature, and park on a level surface.
  1. Slide a pan of at least 8 pts. capacity under the case drain plug.
  2. Remove the filler plug.
  3. Remove the lowest bolt from the front output shaft rear bearing retainer cover, and allow the lubricant to drain. Be careful; the oil will be hot. There may be a drain plug. If so, remove that instead.
  4. Remove the six bolts on the left (driver's) side of the case which secure to P.T.O. (power take-off) cover. Remove this cover and allow the lubricant to drain out.
  5. Remove the speedometer driven gear from the upper left rear corner of the case.
  6. Use a suction gun to remove as much lubricant as possible from the case cover location and the speedometer gear location.
  7. Install the speedometer driven gear, the P.T.O. cover, and the lowest bolt or drain plug.
  8. Add approximately seven pints of oil through the filler plug opening. The proper oil to use is 10W-30 or 10W-40 engine oil.
  9. Check the fluid level and add sufficient oil to raise the level to 1 /2 in. below the filler plug opening. Replace the plug, and wipe the surfaces of the case and skid plate to remove any excess oil. Drive the truck and check for leaks.

I really hope help ypou woth this (remember rated this help) Good luck.

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 chevy 4x4 2500 transfer case slips into neutral


Transfer case internal fork broken take to a tranny shop.or worn out.

Nov 26, 2015 | 1995 Chevrolet Silverado 2500

2 Answers

My chevy 2500 clunks only when driving in 4 wheel drive


May want to look at the front axles. If the boots are torn and the joints are dry, the axle is causing the clunking noise. Also,check the transfer case fluid level,low fluid level can cause the noise due to dry or damaged gears.

Mar 05, 2015 | Cars & Trucks

1 Answer

Where do i look to check and fill transfer case fluid on 1988 chevy 2500 4x4?


on the side of the 88 transfer case is a inspection bolt 15/16 by the front drive shaft if it is a new process 205 case. remove cap bolt and fill till lube comes out and its full

Feb 25, 2011 | 1998 Chevrolet C2500

1 Answer

How much tranny oil capacity for Chevy silverado 2500 1989. The hose to the transmission came off and all the transm. fluid came out. I have replaced the fluid, but it isn't shifting very well anymore. ...


should hold roughly 8 quarts with the converter still full. Run the trans through the gears to get it warm, then check the dipstick while running. I would bet its still low.

Dec 20, 2009 | 1989 Chevrolet Silverado 2500

1 Answer

Type and capacity of fluids


The kind of fluid needed is called GLS this is not something you can get at some grease and go. To my knowledge this particular fluid is still a dealer only item. DO NOT put ATF in your transfer case. I don't remember the capacity but the dealership would have this information.

Nov 22, 2009 | 2001 Chevrolet Silverado 2500HD

4 Answers

Fluid in a transfer case


if it is an electric shift t-case gm has there own oil not found at auto part stores

Sep 18, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

What;s the oil capacity for a 2002 chevy trailblazer 4.2 6 cyl?


Here are the Fluid CAPACITIES & MORE:
Engine, with filter..........4.6 quarts[1]
Cooling System, Initial Fill..........12.0 quarts
Automatic Transmission, Total Fill
4 speed 4L60, 60E..........11.0 quarts
Manual Transmission, NV1500..........5.7 pints
Manual Transmission, NV3500..........4.2 pints
Differential, with 8.6 ring gear Rear..........4.0 pints
Differential, with 7.25 ring gear Front..........2.5 pints[2]
Differential, with 8.25 ring gear Front..........4.2 pints[2]
Differential, with 9.25 ring gear Front..........5.9 pints[2]
Differential, Front..........2.5 pints
Differential, Rear..........4.0 pints
Transfer Case,BW4472..........2.5 pints
Transfer Case,NV136/236/246..........4.0 pints
Transfer Case,NP207..........4.6 pints
Transfer Case,NP231, NP233..........2.3 pints[3]
Transfer Case,NV231/233..........2.1 pints[3]
1. After refill check oil level.
2. Do not use synthetic lubricant in axles using RTV sealant.
Synthetic lubricant will chemically atack RTV sealant.
3. Identification: check tag on case.

Apr 13, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...