Question about 2002 Ford Explorer

Open Question

Were is the central security module on 02 ford explorer

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 30 Answers

SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and

I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.

Posted on Jul 04, 2009

  • 47 Answers

SOURCE: where is the module located on my 02 ford explorer

Hey prodriver359,


The 4WD Control Module is under the kick panel on the passenger's side. It's a small box and easy to replace. It's pretty obvious which box it is because it's really the only major box there, and says 4X4CM on it.


Good Luck

Posted on Jul 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 ford f 150 locked my door went inside horn stated blowing had to unplug it to stop the horn from blowing


Possible issue with security system? There is a central security module that can ground the horn relay. If the security system is the problem you can get it fixed, correctly or clip the wire that allows the central security module to ground the horn relay. I don't know if clipping that wire would have any adverse effects, if so splice the wire back together. Use your best judgement.
f150 horn 1-whhyjzqjjp5evwrxcrtcuanz-2-0.jpg

f150 horn 2-whhyjzqjjp5evwrxcrtcuanz-2-2.jpg

Feb 25, 2017 | Ford Cars & Trucks

1 Answer

Where is the body control module located on a 2002 Ford explorer XLT


It's called a GEM - generic electronic module .It is located behind center of the instrument panel .
SECTION 419-10: Multifunction Electronic Modules 2000 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 10/07/2004 Module - Generic Electronic (GEM)/Central Timer (CTM) Removal
  1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B .
  1. Remove the audio unit. For additional information, refer to Section 415-01 .
  1. Remove the center instrument panel finish panel.
    1. Remove the screws.
    1. Remove the center instrument panel finish panel.
    • Disconnect the electrical connectors.
  1. Remove the GEM/CTM.
    1. Remove the screw.
    1. Disconnect the four connectors from the GEM/CTM.
    1. Remove the GEM/CTM.

Feb 18, 2017 | 2002 Ford Explorer

1 Answer

I own a 02 foard explorer shift motor was bad i think and i removed it, i started it to relocate it, installed the new shift motor


Don's 1999 Ford Ranger shift motor PROBLEM SOLVED ...

? 13:05
https://www.youtube.com/watch?v=wcn39gwPWfI
Oct 1, 2013 - Uploaded by gtarman49
Don's 1999 Ford Ranger shift motor PROBLEM SOLVED. ...How to find replace fix 4x4 transfer case shift module 2002 Ford Explorer 4 wheel ...

How To Install Replace 4x4 Transfer Case Shift Motor Ford ...

? 9:15
https://www.youtube.com/watch?v=9ldrtZODxQ8
Oct 26, 2010 - Uploaded by 1A Auto Parts
How To Install Replace 4x4 Transfer Case Shift Motor Ford Explorer .... transfer case shift module 2002 Ford Explorer 4 wheel drive not working ...

How to find replace fix 4x4 transfer case shift module 2002 ...

? 3:07
https://www.youtube.com/watch?v=sZw3SS2Pt-4
Nov 3, 2013 - Uploaded by kirk colombo
... transfer case shift module 2002 Ford Explorer 4 wheel drivenot working ..... I replaced the transfer motor so i think it is the control module.


Jan 08, 2016 | Cars & Trucks

1 Answer

I have a 2002 ford f150 supercrew lariat, my power door lock on all 4 doors dont work and neither switch works, theres is no clicking sound or anything, but the lights on the switch light up, also the...


You can't figure out thing's without knowing how there work , what controls them . In this case a control module .
Principles of Operation

Power Door Locks
The central security module controls the power door lock and keyless entry system. The lock and unlock operation is carried out by supplying ground to the central security module from the door lock control switch. The normal path of the actuators is to ground through the central security module. The door lock control switch will lock and unlock all doors by grounding the appropriate circuit to the central security module. The central security module then supplies power to the appropriate common actuator circuit to lock or unlock all doors.
Plus we don't guess , we test the electrical circuits with a DVOM - digital multimeter or a test light . We use a wiring diagram so we know which part of the circuits to test .

Keyless Entry
The remote transmitter sends a frequency that is received by the central security module internal antenna. Depending on the frequency received, the central security module will lock all doors or unlock the driver door. If the unlock frequency is received again within five seconds of the first unlock, the central security module will unlock all doors.
If the frequency received is for the panic button, the central security module will cycle ground to the park lamp and horn. The park lamps and horn will continue to cycle until the panic button is pressed again or the ignition switch is turned to the RUN position or 2.75 minutes elapse.
Plus we hook up a scan tool that can read codes from the control module , not a code reader for engine codes , won't work ! Need a professional scan tool .Do you know what DTC'S are ? Diagnostic trouble codes !
Central Security Module Diagnostic Trouble Code (DTC) Index DTC Description Source Action to Take B1309 Power Door Lock Circuit Short to Ground Central Security Module Go To Pinpoint Test C . B1341 Power Door Unlock Circuit Short to Ground Central Security Module Go To Pinpoint Test C . B1485 Brake Pedal Input Circuit Short to Battery Central Security Module Go To Pinpoint Test E . B1526 Keyless Entry Circuit Short to Ground Central Security Module Go To Pinpoint Test F . B1629 PRNDL Reverse Input Short to Battery Central Security Module Go To Pinpoint Test E . B2276 Less Than Two Transmitters Programmed Central Security Module Go To Pinpoint Test I . B2425 Remote Keyless Entry Out of Synchronization Central Security Module Go To Pinpoint Test I . - All Other DTCs Central Security Module REFER to Section 419-10 .
  • All door locks are inoperative
  • Battery junction box (BJB) fuse(s):
    • 8 (15A).
    • 115 (20A) (Super Crew).
  • Circuitry.
  • Central security module.
  • Go To Pinpoint Test C .

Seams you lack the knowledge and test equipment to tackle this type of repair . Your best bet mite be to have a qualified repair shop check it out.
So, without testing i couldn't even begin to suggest what mite be wrong . I would only be guessing , as would anyone on here would.

Jul 30, 2017 | Cars & Trucks

1 Answer

Where is the module located on my 02 ford explorer


Hey prodriver359,


The 4WD Control Module is under the kick panel on the passenger's side. It's a small box and easy to replace. It's pretty obvious which box it is because it's really the only major box there, and says 4X4CM on it.


Good Luck

Jul 29, 2012 | Ford Explorer Cars & Trucks

1 Answer

No Crank No Start power to everything one beep when trying to start!! help?! pats anti theft blinking


if anti theft module not communication with scanner or diagnostic hook up then your vehicle will probably not start till thats corrected and clicking sounds like relay from security system opening up and shutting down power for starting system

May 17, 2017 | 2002 Ford Explorer

2 Answers

Ford mondeo 02plt. Central locking fault


I will say you are having problem with central locking vacuum module.Either that or you are loosing vacuum in the central locking system some where.Diagnostic procedure can be pain in the ***.I would advise you to locate the Module and follow the lines to each door.If rubber vacuum lines are not thorn,I would go and get to salvage yard and get me another module that would be much cheaper.Also there is two relays.One is for unlocking and other one for locking.Try those first before anything else.Usually humidity and cold could damage them.Hope I could help you.

Jan 05, 2010 | 2001 Ford Focus

1 Answer

02 Ford Explorer XLT 4x4 High light flashes and


I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.

Mar 19, 2009 | 2002 Ford Explorer

1 Answer

Windows in a 2005 Ford Lariet super crew will not work.


Have the GEM (Generic Electronic Module) module tested by a Ford dealer, wipers, windows and other systems are controlled through this central module.

Feb 07, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
2002 Ford Explorer Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...