Question about 2005 Cadillac SRX

Open Question

How to remove intake manifold from 2004 Cadillac srx

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Replacing front turn signal bulb on 2006 Cadillac SRX

wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.

Posted on Jan 25, 2009

  • 1 Answer

SOURCE: Changing fuel filter on 2004 Cadillac SRX

If you go to the auto parts store they should have a fuel line disconnect tool that has a 5/16ths end an a 3/8ths end. The tool is shaped like an X. Before you start you need to pull the fuel pump fuse under the front of the REAR passenger side seat while the car is running and let it stall. it will release the built up pressure. This is important unless you want gas to spray every where. Then take the tool and start with the end of the filter with two lines. Place the appropriate end of the tool over the smallest inlet, push the tool in then pull the line towards the filter and then push the line away and it should disconnect. Do the same with line above. Then you can use the two appropriate size wrenches to disconnect the outlet end. reconnecting the new filter is simple just make sure your quick connect lines click in all the way and you tighten the outlet line well, I think its like 22 or 25 ft/lbs.

Posted on Dec 15, 2009

  • 10 Answers

SOURCE: Starting disabled remove key

VEHICLE ANTI THEFT SYSTEM HAVING PROBLEMS

Posted on Apr 13, 2010

bluebirdmate
  • 1190 Answers

SOURCE: what is the firing order of 2004 V8 4.6L cadillac

firing order as follows:1 2 7 3 4 5 6 8 hope this helps 4.6 northstar

Posted on Aug 17, 2010

  • 4336 Answers

SOURCE: Are you suppose to use

Really, you need to use what the manual reccomends, in your case that should be premium. While you will usually not suffer damage from using lower grade, you will suffer performance and economy loss.

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter located on a 2008 cadallic srx


Check under the intake manifold.

4acd21e-n0kdtuwbcqe3x3aef3uy0esw-3-0.gif

Mar 13, 2017 | 2008 Cadillac Srx

1 Answer

Removal of fuel rails 3.0L Cadillac srx 2010


Upper intake manifold will need to be removed, and then you can remove the 4 fuel rail retaining bolts.

Aug 19, 2015 | Cadillac Cars & Trucks

1 Answer

How to remove Cadillac srx center console


Open the lid fully, you should see small hold down bolt heads, maybe 7 mm...these must come completely out, be sure to label as length etc is important. There are also 2 front connectors to the lower dash, but depending on your need to remove, you may not need to remove these...you probably need to remove the gear shift knob to raise the console...look directly under the knob...sometimes a small pull out clip to release the knob, sometimes a allen head screw to release...hope this helps.

Jan 01, 2015 | 2004 Cadillac SRX

2 Answers

How do i replace my heater core in a 2004 cadillac srx


either rip the whole dash out, or take it to a shop that will.

Mar 20, 2012 | 2004 Cadillac SRX

2 Answers

Where is the starter located on a 2005 cadillac srx v 8?


If your SRX has a Northstar V/8 engine the starter is under the intake manifold. The manifold has to be removed to access the starter. Hope this helps, thank you

Sep 04, 2010 | 2005 Cadillac SRX

1 Answer

Need to replace front turn signal bulb on a 2004 Cadillac SRX


need to remove front wheel and panel from the inside.
almost the entire wheel cover need to come off

Aug 04, 2010 | 2004 Cadillac SRX

1 Answer

How do i remove the subwoofer?


Remove the panel it's mounted in and remove it. Don't run the system without it though, it will unbalance the output and could blow the output transistors.

May 25, 2009 | 2004 Cadillac SRX

1 Answer

Starting disabled remove key


VEHICLE ANTI THEFT SYSTEM HAVING PROBLEMS

Apr 14, 2009 | 2004 Cadillac SRX

1 Answer

Remove hood insulator blanket


carefully pry the black plastic fastners holding blanket away from hood. these fastners snap into a bracket attached to the hood replace by inserting into the original hole

Dec 30, 2008 | 2004 Cadillac SRX

Not finding what you are looking for?
2005 Cadillac SRX Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...