Question about Cars & Trucks

Open Question

Fault codes p1693 and p1695 on hyundai accent 2004

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 22156 Answers

SOURCE: Engine Fault code

take the warning light bulb out or stick a bit of black tape over it

Posted on Nov 05, 2008

  • 3854 Answers

SOURCE: Replace oil pan on my Hyundai accent 2004

You can try to re torque the bolts before you drop the pan and re place the gaskit if that is where your leak is coming from. Good luck and hope you don't have to drop the oil pan. 

Posted on Apr 08, 2009

  • 1077 Answers

SOURCE: what does code 1-p0650 mean?

P0650 Malfunction Indicator Lamp (MIL) Control Circuit Malfunction

Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.

Possible Causes:

  • Harness or connectors (MIL circuit is open or shorted.)
  • MIL bulb may be faulty
  • Posted on May 10, 2009

    • 69 Answers

    SOURCE: changing timing belt on 2004 hyundai accent

    Sign up for an account on Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.

    Posted on May 27, 2009

    • 518 Answers

    SOURCE: check engine light on code reads p2096 what

    Fuel trim too lean. Usually means vacuum leak. Look for crushed,broken or melted off vacuum hoses near intake manifold. Or an obvious hissing noise at a normal idle. If so replace or repair clear codes your done. If not obvious take carb cleaner spray with nozzle attached car running & go over all vacuum hoses,intake manifold,egr valve see if idle raises if so you found leak. Repair. Could also be bad oxygen sensor switching bad o2 sensor but rarely.

    Posted on Jun 06, 2010

    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    Error code p0650

    OBD II codes are specific to manufacturers and often specific vehicles. A Hyundai Accent P0650 may not be the same as a Hyundai Sonata P0650 because Hyundai loaded more diagnostic codes into the upscale Sonata.

    Check with AZone or similar, they'll tell you the code description, and give you possible suspect causes to check.

    Jul 24, 2014 | Hyundai Motor 2004 Accent

    1 Answer

    2007 hyundai accent has no horse power

    run fault codes to stop wasting money as the codes will indicate exactly where the faults are.

    Nov 17, 2013 | 2007 Hyundai Accent GS Hatchback

    1 Answer

    Trouble codes p1693 and p1765 can you define ?

    Turbo control circuit (wastegate solenoid) p1693
    Timing solenoid circuit (Variable Valve Timing Control)p1765

    Nov 12, 2013 | 1997 Hyundai Accent

    1 Answer

    What can cause a high Nox emission on 2001 hyundai accent?

    Possibly an oxygen sensor or the egr valve. Best bet to read codes and see if you have any faults. Good Luck! I hope you find this to be very helpful!

    Dec 16, 2009 | 2004 Hyundai Santa Fe

    1 Answer

    04 hyndi accent GL with code returned

    Signal Delay Time for Oxygen Sensor Ageing Limit
    Diagnosis conditions
    • Oxygen sensing after TWC is active
    • No secondary air
    • No diagnosis of secondary air system
    • EVAP canister not highly loaded
    • No faults in memory
    Possible fault cause
    ♦ Oxygen sensor

    Feb 10, 2009 | Hyundai Motor 2004 Accent

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    227 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts


    Level 3 Expert

    76070 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides