Question about 2007 Buick Lucerne CXL
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Replacing front wheel bearing
The brake rotor needs to be removed, drive shaft nut in center of hub then 3 bolts hold the hub assembly to spindle from back side. if it has abs unplug it then some work will need to be done with a hammer and chisel to work the bearing out of spindle and axle shaft from bearing
Posted on Oct 16, 2008
First hook up Positive Red and Negative Black terminals to the battery in the known good car. Then hook the Red terminal on the opposite end of the jumper cables to the positive Red terminal of the battery in the known bad car. Then, carefully, without shorting out the connectors, connect the final black jumper cable to the 'frame' of the known bad car.
Hope this helps.
Posted on Jul 13, 2010
SOURCE: My 2007 Buick Lucerne drivers
first purchase the door handle assembly then remove the door panel. make sure the window is up and reach in and disconnect the rods making a note of which one goes to which one. unbolt the door handle and remove. the new door handle may come with a new rubber seal for it. position over new handle and reinstall. make sure to search the door panel for hidden screws holding it on before you pop the clips.. hope this helps
Posted on Feb 05, 2011
SOURCE: 2007 lucerne has water in
This could be coming in from a number of areas. The seal on the rear window, the rear lamp seals or the trunk lid seal. Empty out the trunk, remove all moisture and finally dust with baby powder. Now spray your car simulating rain, for about 15 minutes. When you open the trunk you will be able to trace the cause of the leak by following the runs in the powder. All you then need to do is seal the ingress and retest. Clean out all the powder when finished, leaving it all scented and not smelling of wet dog. Hope this helps...Please vote for me.
Posted on Mar 15, 2011
Tips for a great answer:
Apr 23, 2017 | Buick Cars & Trucks
Nov 26, 2016 | Buick Cars & Trucks
Sep 27, 2016 | 2007 Buick Lucerne
Feb 04, 2016 | 2007 Buick Lucerne
Jan 05, 2016 | 2011 Buick Lucerne CXL
Aug 08, 2015 | 2007 Buick Lucerne
Dec 15, 2014 | 2007 Buick Lucerne
Apr 09, 2014 | 2007 Buick Lucerne CXS Sedan
Mar 28, 2013 | 2006 Buick Lucerne
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: