Question about Toyota Fortuner

Open Question

Fortuner cigar lighter not working - Fortuner Toyota Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bryant329
  • 125 Answers

SOURCE: cigar lighter problem on 2005 Ford Explorer

even though the fuse is good, change it anyway and look for other bad fuses. it is possible that someone rewired and put wired them somewhere else. i just saw that yesterday. also, check to make sure a wire did not fall off or get broken/fried. if both power points are not working they are connected to the same power and ground points, whereby creating a circle/circuit. also check to see if one of the units is bad. if it take two to complete the circuit/circle and one unit is bad, maybe the circle/circuit is broken. you can test the units with two jumper wires and your battery/a jump box. these units are only + and -.

Posted on Sep 23, 2008

freetek
  • 5568 Answers

SOURCE: cigar lighter is not working ?

The fuses are metal-bladed, plastic housing devices and they are sometimes difficult to remove. Many cars have a fuse puller inside the fuse box but any auto parts store will have them and they are included with fuse assortments they sell.
Once you are roaming around getting fuses and puller, consider buying a low-cost digital multimeter too. The parts stores have them or, if you are in the US, Radio Shack will too and don't spend more than $20 US at either, you don't need more meter than that for household use. If you are in the US, check the white pages for your area for Harbor Freight. If you have one, you can buy a meter there for <$10.
With meter, and fuse removed, set the meter to the resistance scale (Ohms) and the lowest setting, generally 200. Check across the metal blades of the fuse and if the meter display shows something close to zero (typically they will show test lead resistance of .2-.6 on the display if the two leads are held together), the fuse is OK. If the display just blinks at you as it does with nothing connected to the meter leads, the fuse is open (blown). 
The fuses are color coded but make sure that the value of the fuse (from your newly purchased handy assortment) is the same as your old one unless it is something under 10 Amps. If it is, use a 10 amp fuse as the replacement.
And remember, smoking kills - (us).       

Posted on Oct 15, 2008

emissionwiz
  • 75822 Answers

SOURCE: The cigar lighter isn't working how do I fix this problem

This is a fuse problem, check the fuse, it will either be marked lighter or power point, the fuse box is to the left of the steering column it has a plastic cover over it, inside the cover the fuses will be marked on a diagram. If the fuse blows again the cigar lighter is shorted, you will have to replace it, most times the lighter element is the problem and not the well it fits into.

Posted on Oct 16, 2008

  • 4369 Answers

SOURCE: replace cigar lighter zx2 2001

here's picture. Looks like it unscrews.

ef484d9.gif

Posted on Mar 12, 2009

  • 8 Answers

SOURCE: Toyota Caldina 2001 no power to cigar lighter, radio, clock!

Hi there
If it was the front dash mounted lighter socket you used, the correct fuse is the 15A CIG & RADIO fuse (at the end of the second row) of the dash fusebox. If replacing the fuse hasn't fixed it, you may need to look closer at the wiring from the fusebox as it's likely the wiring has gone open circuit.
Take the fuse out and check for voltage at the terminals in the fusebox with the ingition key turned to the ACC position. One terminal or the other will have 12V on it. If no voltage on either you have a fusebox to ignition key wiring problem. Check for voltage on the ACC pin of the ignition switch, with the key turned to the ACC position. That's pin 3, a blue wire, of the 8 pin ignition switch connector. If still no volatge the switch is likely faulty. the voltage into the switch must be there as it also feeds the ECU and IGN systems, so the car wouldn't run at all if it wasn't.

There is another possibility. If you have an alarm system, immobilizer or turbo timer (assuming the GTT model) these devices could be interrupting the power lines and be the culprit devices.

I assume it wasn't the rear hatch area lighter socket you used, because the fuse for that doesn't power the radio or clock. The fuse for that socket is the 15A ACCESSORY fuse in the passenger side footwell fuse panel.

Posted on Oct 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 cadillac, front cigar lighter stoped working,rear one works and i checked fuses and only found 1 marked cigar lighter and its fine. I took rear one out and put it in front and still nothing, put front...


If you are refering to the 40 Amp "CIGAR" fuse under the left rear seat, this is the "main" fuse for the lighters. There are 2 more in the engine compartment fuse block. They are marked "C/LTR 1" and C/LTR 2". They are both 20 Amp fuses.

Dec 21, 2011 | 2002 Cadillac Deville

1 Answer

Cigar lighter in My 1996 toyota avalon cannot work well because my navigator cannot charge when pull inside the plug. my radio is ok and I check the fuse it is in good condition. So I think the problem...


there could be no screw, maybe clippers holds that. try pull the frame with hand to unclip, could be bad connection in back of cigar lighter or bad wiring

Feb 11, 2011 | 1996 Toyota Avalon

1 Answer

I have no cigar lighter hahe changed cigar lighter


Take wires out of cigaret lighter , then replace fuse , if fuse stays ok without cigaret lighter connected then something shortning lighter inside.

May 07, 2010 | 1993 Honda Accord

1 Answer

I have Mitsubishi eclipse '98 GS.Cigaret lighter just stopped working. Checked the fused and replaced but it's still doesn't work. I was using a portable compressor to pump some air in my tire. I need it...


so you replaced a blown fuse to the cigar lighter and it still dosent work?.. then the wiring was compromised before the fuse blew..you need to repair bad wiring to cigar lighter and/or lighter itself internally melted /failed due to your air pump asking for more electricity than the cigar lighter could deliver..once repaired do not use the air pump there again ..good luck

Dec 02, 2008 | Mitsubishi Eclipse Cars & Trucks

2 Answers

The cigar lighter isn't working how do I fix this problem


This is a fuse problem, check the fuse, it will either be marked lighter or power point, the fuse box is to the left of the steering column it has a plastic cover over it, inside the cover the fuses will be marked on a diagram. If the fuse blows again the cigar lighter is shorted, you will have to replace it, most times the lighter element is the problem and not the well it fits into.

Oct 16, 2008 | 2003 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...