Question about 2004 Mazda 6

1 Answer

Car turns over dont start - 2004 Mazda 6

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 364 Answers

Ok this could be many things without having any info on the car. Heres some questions you can break down. Firstly, does it have gas? can you hear the fuel pump "whirring" when you turn on the ignition? Have you checked ALL the fuses? and lastly more than likely, the computer may have had a glitch or something happened when you jump started your friends car etc, so the transponder in your key may not be contacting with your onboard computer. If the transponder in your key takes a battery, try changing it. good luck, hope this helps.

Posted on Oct 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car started ran for a bit turned back on. now it turns over and tries to start but dont stay on came out 2 hrs later it started ran start back up n now it dont start again??


run the fault codes and check for electronic failure ---ignition control module , coil/s, ECM crank / cam position sensor
failing when hot

May 01, 2016 | Cars & Trucks

1 Answer

Codes 12-01


dont crank at the normal 250rpm or more, yes/no
cranks perfectly but does not start ?
same, but starts and stalls in 2 seconds.?
which?

Jul 12, 2013 | 2000 Honda Accord

1 Answer

Will not start


its possible its the fuel pump it self if u dont smell gas. When u turn the ignnition if u do not hear the fuel pump engage thats the problem. Dont start the car just turn the ignition;.

Jan 13, 2013 | 2003 Ford Mustang

1 Answer

Security light flashing on 04 grand am, car want start


okay try this ,put key in ignition turn to on position for ten minutes ,roll window down so you dont lock keys in car before you do this. turn to on for ten minutes dont touch anything or turn anything on make sure all accesories are offthen turn key to off position for 10 seconds then try to start.
its important that you dont have radio or any accessory on during this process.

tw0seven0-fivefivesix-seventhreefiveseven

Dec 24, 2010 | 2004 Pontiac Grand Am

1 Answer

Securyty ligth car dont star


ANY TIME SECURITY LIGHT COME ON YOU HAVE FAULT IN THE IGNITION KEY OR KEYS THEY COULD BE WORN OUT WHERE TO A POINT WHERE THE BCM AND PCM DONT RECOGNIZE THE CAR KEYS CAUSING NO START CONDITIONS.ALSO WORN KEY SWITCH AND BCM WILL CAUSE NO START CONDITIONS.TRY THESE TWO THINGS TRY ANOTHER CAR KEY IF STILL DONT CRANK.PUT KEY IN IGNITION TURN KEY TO ON POSITION WITH ENGINE OFF LEAVE KEY ON POSITION IN IGNITION FOR 10 MINUTES WATCH DASH SECURITY LIGHT WHEN IT TURNS OFF IN 10 MINUTES.TURN OFF IGNITION FOR 5 SECONDS THEN TRY STARTING CAR IF CRANKS OR DONT STILL THE PROBLEM IS IN THE THEFT SECURITY SYSTEM NEED TO GET DEALERSHIP TO FIX THEY HAVE DIAGNOSTIC EQUIPMENT TO FIX AND REPROGRAM THEFT SECURITY. SYSTEM.

May 25, 2010 | 1999 Oldsmobile Alero

1 Answer

The car dont want to start


sounds like your security was tripped somehow..

1. turn the key to start the engine then immediatley release it to the on position. Keep it on the on position for 15 min. Watch the security light. The light should go out in 10-15 min. Turn the key off and wait 10 seconds.

repeat that same process 2 more times. After that your car should start. i had this same problem. Mine is a 03 but im assuming yours has the pass lock security on it also..

Oct 12, 2009 | 2001 Pontiac Sunfire

1 Answer

Dont start


Any damage to the key lock cylinder? If not nobody has tried to start it that way and no other way can be done unless its a trained qualified person

May 26, 2009 | 1989 Cadillac Eldorado

1 Answer

Car wont start


Try this Put your key in turn it on dont start wait 10 mins remove key wait 10 seconds repeat this a total of 3 times. If that dont work try a different key do the same thing. If that dont work a dealer needs to probably replace and reprogram your ignition switch and keys

Apr 06, 2009 | 2005 Chevrolet TrailBlazer

Not finding what you are looking for?
2004 Mazda 6 Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...