Question about Mazda MAZDA5
My mazda premacy which i do think is the same as the mazda 5 engine AT light comes on and the car vibrates when stationary in reverse or drive
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you can find a manual at Napa or Oreillys auto parts store for around 20 dollars hope this helps please rate this solution thanks
Posted on Aug 29, 2008
SOURCE: Car stops moving in reverse gear
Sounds like the car is just slipping out of gear. Keep your hand on the shifter when you back up next time. See if you can feel the shifter move when the car comes out of gear. If the shifter moves up when it happens keep pressure on the shifter holding it back like you dont want it to move forward. And of course if the shifter moves back when it comes out of gear, put forward pressure on the shifter so it doesnt slip out. This might work for now but but i know i wouldnt want to spen 700 for that ****. Let me know how it goes.
Posted on Nov 20, 2008
Wow..thats not good..first have motor mounts checked, maybe the tranny mount or possibly if ur car has it is the driveshaft bearings...good luck on the oil leak...maybe tranny fluid..make sure if ur losing fluid that ur checking them incl. the tranny fluid...u might find ur leak first of all by rechecking the oil cap where it is supposed to be ...same with all fluid caps.
Posted on Feb 27, 2009
With these computers, anytime your check engine light comes on and than you replace the part, the computer has to be reset with handheld scanner/computer.
So even with a new part, the computer still has to be electronically reset.
Even if there are no codes. You won't have codes because the part is new, but the engine light will remain on until it is reset.
If you have all new parts, no codes, and had the system reset. It could be a problem with the computer itself and will have to be put on a diagnostic computer for further testing.
Posted on May 11, 2009
SOURCE: Engine Light ON
Your P0700 code needs to be addressed right away. This signifies a problem with the solenoid pack, which is an external part that can be fixed for around $200 if you do it yourself, $300 if you take it somewhere. But a bad solenoid pack can mess up the whole tranny resulting in a total rebuild, which runs anywhere from $1200 to $2000 depending on where you go.
Your P1770 error is a Clutch Solenoid Circuit Malfunction. Definitely sounds like you have a solenoid problem. Let me know if you have any other questions. Thanks for ranking my response and for using FixYa!
Posted on May 25, 2009
Tips for a great answer:
Sep 26, 2016 | Mazda Premacy Cars & Trucks
Jun 09, 2016 | Mazda Cars & Trucks
Nov 20, 2015 | Mazda Cars & Trucks
Aug 02, 2015 | Mazda Cars & Trucks
Apr 17, 2014 | Mazda MPV Cars & Trucks
Mar 26, 2013 | Mazda MAZDA5 Cars & Trucks
Nov 16, 2012 | Mazda MPV Cars & Trucks
Jun 15, 2010 | 2000 Mazda MPV
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: