Question about 1996 Dodge Ram 1500 Club Cab
Look for a part of that wire cable that is rubbing on metal somewhere or that some mechanic pinched under a bolt or drilled a screw through. It may take some time but the closer you look at that wire from end to end the faster you will find the problem. Blowing a 30 amp fuse means something is shorting out pretty good so go find the short.
Posted on Nov 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
take door pannal off there should be 3 bolts in the inside of the door where mirror sits unless its the reflection peace where you have to just get a new mirror
Posted on Jul 19, 2009
those sensors could cause the issue, clean the MAF 1st, also clean the idle system using the following procedure, the IAC can cause cruise surge. I use this to cure these problems all the time.
Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve (IAC) and throttle valve, they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.
Posted on Jan 13, 2009
Follow your exhaust manifold down from engine to exhaust pipes etc, you should see them sticking out, 3"-4" approx.length, with wires coming from them. Some are right on manifold, some further down on exhaust pipes.
Posted on Apr 15, 2009
by process of elimination!
one door at a time so disconnect 3 & keep changing the active one till you find which one isnt working
then test its circuits ok
Posted on Jul 20, 2009
Tips for a great answer:
Dec 16, 2014 | 2005 Dodge Ram 1500
Oct 19, 2013 | 1996 Dodge Ram
Sep 16, 2011 | Dodge Ram 1500 Cars & Trucks
May 14, 2010 | 1996 Dodge Ram 1500 Club Cab
Feb 24, 2010 | 1996 Dodge Ram 1500 Club Cab
Dec 17, 2009 | 1996 Dodge Ram 1500 Club Cab
Dec 02, 2009 | 1996 Dodge Ram 1500 Club Cab
Jul 20, 2009 | Dodge Ram 1500 Cars & Trucks
Jun 27, 2008 | 2001 Dodge Ram 1500 Truck 2WD
257 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: