Question about 1998 Dodge Stratus
That points to a damaged IDLE SPEED CONTROL or "AIS"...
Sometimes it gets fixed by removing and cleaning with carburetor solvent. Check electrical connector first. A large vacuum leak can be the problem too. Amclaussen.
Posted on Jan 22, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
ok first the fan relay should be located inside the elecrical box. this is usually located on the drivers side under the hood. next even you have only one speed when you turn the switch it's because the reostat is bad it is located in the fan motor housing. hope this helps.
Posted on Aug 28, 2008
SOURCE: 1996 dodge stratus high idle?
hi, the idle on a car can be changed by a couple of things... usualy the one that will cause high idle before anything else will be if there is a air leak lettting air into the intake anywhere after the airflow sensor, this is because the sensor cannot read the amount of air entering the engine so it cannot compensate... the easiest way to test this is first to lissen for hissing etc and if there is some noise you can spray a bit of 'easy start' in the general area and it will be sucked in with the air and the car will idle differently again.. be carefull with the easy start it can be dangerous with the engine running, a mechanic will usualy have a machine that senses air leaks
Posted on Feb 10, 2010
Tips for a great answer:
Dec 28, 2015 | Dodge Cars & Trucks
Jan 25, 2015 | 2004 Dodge Stratus
Dec 03, 2013 | 2000 Dodge Stratus
Mar 22, 2013 | 1996 Dodge Stratus
Oct 02, 2009 | 1998 Chevrolet S-10 Pickup
Aug 28, 2008 | 2004 Dodge Stratus
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: