Question about 2000 Buick LeSabre
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the engine is 3.8L SFI OHV the Knock sensor is located under hood, passenger side, front engine area, below exhaust manifold, mounted in engine block
Posted on Mar 14, 2009
The reset button is located under the passenger side of the instrument panel.
With the ignition in the ON position, but the engine not started, use a pencil to push the reset button, holding it for five seconds.
After this, the "Change Oil Soon" lamp will flash four times. This indicates that the Oil Life Monitor System has acknowledged the oil change.
Posted on Apr 09, 2009
Someone put the wrong key (resistor value) in the ignition lock, you will have to disconect the battery for 3 min. Make sure you have the right key. Very important! Make sure the climate control is off before disconecting/conecting the battery.
Posted on May 08, 2009
For most common location, open hood and look near cowl for a plug near the air conditioning box just forward of the windshield wipers. It should have several wipers and the resistor itself protrudes downward into the box held in place with two screws. Screws have 7mm, 8mm, or 1/4 inch hex head.
If not: look near blower itself under the dash on the passenger side. The resistor should protrude upwards into the HVAC housing near the blower.
Posted on Sep 17, 2009
Testimonial: "That was quick! Thanks! Perhaps in passenger compartment versus engine compartment!"
Yes ,,instructions are below, Use eye protection for this procedure
Remove or Disconnect:
Posted on Oct 20, 2010
Tips for a great answer:
Sep 06, 2015 | Buick Cars & Trucks
Mar 24, 2015 | Buick Rainier Cars & Trucks
Nov 08, 2014 | 1992 Buick LeSabre
Fig. Fig. 1 Blower resistor assembly is underneath the fuse block
REMOVAL & INSTALLATION
Aug 14, 2012 | 1992 Buick Park Avenue
Dec 31, 2010 | 2001 Buick LeSabre
May 19, 2010 | 1992 Buick LeSabre
Apr 23, 2010 | 1992 Buick LeSabre
Mar 14, 2009 | 2001 Buick LeSabre
121 people viewed this question
Usually answered in minutes!