Question about Jeep Grand Cherokee
If they punched out the cat, it was probably because raw fuel was damaging it. Check to see if your engine has a misfire. Look at your spark plugs, if one has a different wear pattern your problem most likely lies in that cylinder
Posted on Oct 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Pull your oil cap, check on the underside, if its white and thick you need a head gasket. that would explaine why the dealer telling you that you need a new headgasket. if it "looks normal" change your water pump.
Posted on Jan 23, 2009
Thermostat is located on 4.0L I-6 on front cylinder head. The 3.7L V-6 thermostat is located where the lower radiator hose attaches to engine. The 4.7L V-8 thermostat is located where the lower radiator hose attaches to engine. The 5.7L V-8 thermostat is located where the upper radiator hose attaches to engine. The 3.9L V-6 and 5.9L V-8 Thermostat is located on front top of intake manfold (between alternator and ac compressor)
Posted on Apr 27, 2009
Just a heads up, $10 bucks will buy you a seal kit for the P.S. pump. I topped mine off for a couple months, then the oring on the high pressure line (from pump, front center) blew and dumped the reservoir in a matter of miles.
The line can be a stinker to get off, recommend driving the car for a few minutes to heat up the pump a little. Don't forget the 20MM wrench.
Posted on May 14, 2009
SOURCE: Jeep Grand Cherokee Power Loss
a bad cam sensor will cause vehicle to shut off while driving, and cause a hard time starting. but this usually sets a trouble code p0340. scan vehicle to see if any codes come up. after it is fixed, erase codes with a obd2 scanner. if you do not have one, you can go to any auto parts store and they will erase codes for free.
Posted on Jan 21, 2010
Tips for a great answer:
Feb 12, 2013 | 2001 Jeep Grand Cherokee
Sep 19, 2012 | 1995 Jeep Grand Cherokee
Jun 09, 2012 | 1996 Jeep Grand Cherokee
Mar 25, 2017 | 1997 Jeep Grand Cherokee
Sep 29, 2011 | 1995 Jeep Grand Cherokee
May 21, 2010 | 1997 Jeep Grand Cherokee
Mar 11, 2010 | 2000 Jeep Grand Cherokee
Jan 23, 2010 | 1997 Jeep Grand Cherokee
Mar 25, 2009 | 1997 Jeep Grand Cherokee
Dec 17, 2008 | 1997 Jeep Grand Cherokee
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: