Question about 2007 Dodge Caliber SXT Sport Hatchback
What about the coil packs? Do you have a check engine light on? If so take it to an auto parts store and see if they will scan your vehicle for the codes.
Posted on Oct 19, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Engine light on? sounds like EGR valve the cross pipe from EGR to air intake plugs causes them to idle rough if eng light not on soon it will surface! good luck hope this helps!
Posted on Dec 23, 2008
P0304 Cylinder 4 Misfire Detected P0354 Ignition Coil 4 Control Circuit P0204 Injector 4 Control Circuit You need to check injetror wires an coil wires .If good, The new coil my not be good.The Injector my be bad. If good it the ECM Check all fuses.
Posted on Jan 15, 2009
SOURCE: Check engine light
A multi misfire may mean that one or more of the following has happened:
Faulty spark plug or wires, Faulty coil (pack), Faulty oxygen sensor(s), Faulty fuel injector(s), Stuck/blocked EGR valve / passages, Faulty camshaft position sensor, Defective computer.
The engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wire, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the the problems were faulty fuel injectors.
Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.
Good luck and hope this information helps, keep me posted, be glad to help you get the truck running 100% again. Not sure if your running a K&N air filter, and if you are there may be a flim of oil on the MAF sensor that is making you run lean. You may want to spray down the MAF sensor with a can of MAF cleaner.
Posted on Jul 02, 2009
SOURCE: I HAVE A 1996 INTREPID.
Maybe check the flex plate. I had a 94 concorde with a similar problem. Scanner said it was the cam and crank sensors. The flex plate can get a crack around the bolt pattern which allows it to shimmy when running. throwing off the cam and crank somehow as the mechanic tried to explain to me.
Posted on Aug 23, 2009
Tips for a great answer:
Oct 09, 2015 | Cars & Trucks
Sep 19, 2015 | Suzuki Vitara Cars & Trucks
Jan 17, 2014 | Cars & Trucks
Sep 30, 2010 | 2003 Ford ZX2
Apr 16, 2010 | Ford F-150 Cars & Trucks
Jul 06, 2009 | 1994 Geo Prizm
276 people viewed this question
Usually answered in minutes!