Question about Cars & Trucks
I have a 1995 chevy pickup 350 with a three speed automatic at an idle or in neutral the engine lopes in gear it idles good but tries to take off in 3 gear if I shift to 1st gear and the to 2nd gear it stays in 1st. seams like all I got is 1st and 2nd gear
This is as simple as adjusting the selector linkage, ensure that once it is done that there is a locking nut or lock thread preventing it becoming loose again. Good luck.
Posted on Oct 20, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
What you need to check is the transmission release bearing because if there is a clearance on the release bearing you will encounter this problem and also check the transmission oil.
I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482
Posted on Jun 08, 2009
Tips for a great answer:
Oct 31, 2015 | Cars & Trucks
Jun 05, 2015 | Nissan Hardbody Cars & Trucks
Aug 02, 2013 | 1995 Honda Accord
Engine stall or RPM fluctuates
is commonly caused by a dirty automatic idle speed control valve and
throttle valve. Buy a can of throttle valve cleaner (do not use
carburetor spray cleaner!) from NAPA or Carquest (made by CRC
chemicals) and spray it into the air intake while the engine is
running, use up about 1/2 the can, engine will try to stall hold the
speed up, shut it down and let it soak for 30 minutes, restart and
blow out the remaining fluid, shut it down and disconnect the
negative battery cable for 5 Min's to reset the base idle control.
Below is a picture of the switch I mentioned.
Sep 25, 2012 | 1995 Chevrolet Lumina
Oct 29, 2011 | 2003 Chevrolet Suburban 1500
Sep 17, 2010 | 1985 Chevrolet Chevy
Aug 05, 2010 | 1992 Chevrolet K1500
Jun 29, 2009 | 1996 Chevrolet Suburban
114 people viewed this question
Usually answered in minutes!