Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
have you dropped the pan to see whats the bands are set at, any debris in pan bottom, whats your governor pressure, if bands are ok, but gov pressures are not relative to speed 1 psi per mph up to 95-127psi, port is on pass side of case rear top right, scan tool would be very helpful, your must have mil light on for this problem, gov dtc's, replace gov transducer as gov solniod as a pair, no exceptions, also are there any 02 sensor dtc's, shorted to voltage, this wil make pcm do stupid things to trans shift, affecting gov signals. GOOD LUCK RDJRP
Posted on Aug 03, 2009
Most important is making sure the trans is full, especially after doing a
trans service, since the torque convertor needs to be under a load when filling it, to completely be full. If you had the vehicle running and shifted
it through the gears while filling it up with tranny fluid, your good, but if
not, check it again.
Posted on Mar 30, 2010
Tips for a great answer:
Jan 07, 2016 | Dodge Cars & Trucks
Aug 06, 2014 | Cars & Trucks
Jan 11, 2010 | 1997 Dodge Ram 1500 Club Cab
Nov 09, 2009 | 1998 Dodge Ram 1500 4WD
Jul 10, 2009 | 1999 Dodge Ram
Jun 23, 2009 | 2004 Dodge Ram 1500
Mar 09, 2009 | 1998 Dodge Ram 1500 4WD
Jan 14, 2009 | 1998 Dodge Ram 1500 4WD
16 people viewed this question
Usually answered in minutes!