Question about 2001 Ford Ranger Regular Cab

Open Question

I have troubleshooting code No. P0136 from the machine. How can I fix this problem?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have 4 codes P0306 P1181 P0141 P0136 is there easy fix? Also vibration at high speeds and passenger aide in front sounds like humming any ideas 2000 Volvo S80 2.9 Non turbo

There is no "easy fix" as only 2 of the 4 codes are for the same thing...for the P0136 and P0141, its probably a bad Bank 1 sensor 2 oxygen sensor..the P0306 means cylinder 6 is misfiring (it could be bad spark plug, bad coil, bad injector, carbon on valves, low compression) and P1181 is showing a fuel delivery issue high for the vibration, have all tires checked for balance and hum on passenger side is possibly a bad wheel bearing...and and all is best to have checked by your mechanic.

Apr 05, 2015 | 2000 Volvo S80

1 Answer

P0136 & p0138

I would replace the engine thermostat and clear the codes and drive it for a few days. P0136 is engine does not reach operating temperature

Mar 20, 2014 | Cars & Trucks

1 Answer

P0136 ford windstar 2000

P0136 is an oxygen sensor check code for sensor 2 in bank 1. This can indicate a faulty sensor, but more commonly it indicates an issue with the exhaust. There may be a leak somewhere near the sensor causing an erroneous report to the engine computer for fuel to air ratio in the exhaust. This can be difficult to detect. At a garage, they will probably use a smoke machine to detect airflow around exhaust gaskets to spot a leak, barring that, they will replace the sensor. If the light still comes on after confirmation there are no leaks and the sensor has been replaced, it would indicate a problem in the wiring on the line between the sensor and the engine computer.

Further reading about the code can be found here:

Oct 25, 2012 | 2000 Ford Windstar

1 Answer

Po136 honda accord coupe 98 fix

P0136 Definition is 02 heater circuit bank 1 sensor 2,This sensor is a catalytic monitor sensor,if you replace this sensor and it reappears a catalytic replacement maybe required for your solution
by the way P0136 Honda doest use this code definition,

Aug 12, 2012 | 1998 Honda Accord

1 Answer

1998 Ford Mustang 3.8L broken hose.

Have you replaced the broken hose? The bad part can cause the other codes to appear so fix what you know is bad, disconnect the negative battery cable for 10 minutes afterwards and then start it up and see what happens.

All you need to do with the codes are to put each one in the search bar and search for ford code p1443, ford code p0136, and ford code p0141. But do that after you fix the obvious problem.

Feb 18, 2018 | 1998 Ford Mustang

4 Answers

I have four codes. P0136, P0141, P0171, P0401.

p0136 and p0141 are o2 sensors and p0401 is a egr flow and the p0171 means its running lean on low bank 1

Jun 30, 2010 | 1996 Ford Econoline

3 Answers

I failed the emisson's test. I have a 97 Nissan

P0136 indicates a bad O2 sensor. This reports poor emission performance back to the car's PCM (computer)
P0325 indicates a bad "Knock" sensor which would adversely effect drivability as far as performance is concerned. Only way to fix these 2 problems is replacement of the 2 components.

Nov 03, 2009 | 1997 Nissan Maxima

3 Answers

I get engine light, borrowed neighbors DTC reader get code P0136, could bad gas cap cause the eror?


Yes this can be caused by the gas cap lack or week rubber.

Rate this and replace the gas cap.

Sep 01, 2009 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
2001 Ford Ranger Regular Cab Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides