Question about 2005 Chevrolet Monte Carlo

1 Answer

Radio has no power fuse is good - 2005 Chevrolet Monte Carlo

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 130 Answers

Now you have to unplug the plug into the back of the radio .use a 12 volt test light and see if you have power to plug .if you do the radio is probely burned out. get one at auto wrecker or a after market one. if no power to plug you need to follow it back to where you find power say the right side of fuse then go forward with that colored wire or run a new wire from that side of fuse box and crimp it onto the wire at the plug.cut it back a inch or two attach new wire.

Posted on Oct 20, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Ford Escapes radio wont work and it doesnt let me lock my doors when the car isnt running it also doesnt ding when the car doors are open. what is happening?


Hello Al,

Does your dash display a flashing "service soon" indicator?
Have you checked for fault codes?

You have a good battery, your ignition switch is powering up the vehicles dash board and the vehicle will start and operate normally....?

Any lights on the radio display?
Check for 12 volts on the radio power lead...no power? check for 12 volts across the accessory / radio position in the fuse box. No power but fuse is good...wiring issue in the harness.

Power across fused circuit no power to radio check radio's in line fuse...fuse good? ... radio bad or disconnected speaker wires.

Make sure all your vehicles grounding positions are clean and tight.

When you say your door locks don't work are your talking about the switch on the door or the remote fob?

Check your owners manual to check for any radio reset info.

Jul 25, 2016 | 2004 Ford Escape

1 Answer

I have 2006 taurus and no manual or labels on fuses need to know what fuse is for radio


The fuse you want to check is the F1-17 fuse in the battery junction box. This is the radio fuse.
The number F1-17 fuse is the red/yellow power wire at the radio. If the fuse is good pull the radio and check the red/yellow wire for power in, if you have power in , then suspect a bad radio.My next step would be to remove the radio and check the power wire going into the radio (red/yellow) . If you have power there, then the radio is likely bad. Ford has had major problems with the radios.

Feb 15, 2016 | Cars & Trucks

1 Answer

1997 camry no power to radio


fuses that look bad are.
fuses that look good , can be , in FACT bad.
DMM, (flip to low ohms)
fuse reads 0 ohms, its good
fuse reads infinity its bad.
if fuse is good check for 12 at the radio power wire.
the radio must be ground do work, is it?
some radios have a separate ground wire (black) is it grounded?
post new radio make and model and can answer with 100% accuracy.
im a retire ET.
DC to daylight. experances.

Dec 24, 2013 | 1997 Toyota Camry

1 Answer

Radio Fuse is good, how ever radio wont turn on, what other than fuse could be my problem?


I show two fuses in the power distribution center (in the trunk?). The fuses are 36 and 40. There could have been a spontaneous failure of the power switch, i.e., it works mechanically but does not turn on power.

Dec 12, 2013 | 2006 Chrysler 300

1 Answer

How do find the radio fuse when it is blown


Easy way. With a test light connected to ground ( a test light is a tool that looks like a ice pick with a clear handle with a bulb inside, and a wire coming out the end with a clip on it) Connect the clip on the light to a metal ground under the dash and with the fuse panel where you can see it, touch the pointer to each side of the back of the fuses, with the key on. The light should lght on both sides of a good fuse. If a fuse lights the light on one side and not the other it's blown. For the radio to work three fuses all need to be good as theirs all the time power and key on power and lighting as the dash lights power. The cigar fuse many times provides the all the time power, But if it's blown the radio won't play. Pull one fuse at a time and look at them to see if the bar inside the fuse is good ( they can look good and be bad) back to the test light meathod, Look the fuses up in the owers manul and it'll tell you the location of the fuse but the radio fuse can be good and the radio strill not work as the cigar fuse has to be good too, There;s another fuse panel under the hood that has the main fuses near the battery, Again the test light is fastest and easiest as any fuse blown even though it's not the radio fuse can make the radio not play. Aftermarket radios can have inline fuses instlled by the radio installer and some have fuses right on the back of the radio.

Jun 24, 2011 | 1999 Mercury Grand Marquis

2 Answers

I can't locate the radio fuse on the diagram on the fuse box cover? What amp and what is it labeled?


your radio does not have a fuse in the way we used to think fo a radio fuse the radio gets it's power from the power control module that is located on top of the trans axle the clock on the radio gets it's power from the IOD fuse in the relay center under the hood.

Dec 10, 2010 | 2004 Dodge Grand Caravan

1 Answer

I have a 1998 honda crv and the radio show err 3. the dealer gave me the 5 digit code to type in after i turn on the radio and it doesn't seem to work.


Check the fuses first. IF the fuses are good check the power TO the radio. There is sometimes a fuse within the positive lead to the radio, . If that fuse is good, try to provide a seperate power source to the radio to power it up. e.g. a battery charger on 4-6 amps is a good way to get power to the system. NEVER power the computer with an outside power source, as the amps will destroy it. The problem COULD also be the computer, although this problem is rare, it CAN happen.

Mar 21, 2010 | 1998 Honda CR-V

1 Answer

Need to find the fuse for the radio


The fuse you want to check is the F1-17 fuse in the battery junction box. This is the radio fuse.
The number F1-17 fuse is the red/yellow power wire at the radio. If the fuse is good pull the radio and check the red/yellow wire for power in, if you have power in , then suspect a bad radio.

My next step would be to remove the radio and check the power wire going into the radio (red/yellow) . If you have power there, then the radio is likely bad. Ford has had major problems with the radios.

Oct 31, 2009 | 2002 Ford Taurus

3 Answers

Radio no power 2000 vw beetle.


you may try checking the fuse box and see if the radio fuse is broken, if it is, try to raplace it.

Jul 16, 2009 | 2000 Volkswagen Beetle

Not finding what you are looking for?
2005 Chevrolet Monte Carlo Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...