Question about 2005 Peugeot 405

Open Question

Citroen 2.0 hdi 16v egr valve !!!!!!!!!!!!!!!!! i

Citroen 2.0 hdi 16v egr valve !!!!!!!!!!!!!!!!! i try to removed it but there must be something holding it on somewere else , 4 hours ive been trying for now , i removed the two bolt what hold it to the cooler and removed the two long bolts what hold it the the engine , but it wont come off , ive try to prise it with a screw driver but it wont come

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: track rod end on peugeot 306 hdi

put a jack under the trackrod end and jack up applying presure that will stop it turning ok

Posted on Jan 30, 2009

  • 1 Answer

SOURCE: expert van 2.0 hdi engine runs lovely until you

Hi You need to get the ecu checked for fault codes if there are none it is possibly low fuel pressure you should allso check this have you changed the fuel filter or opened any fuel lines this could introduce air
which will lower fuel pressure.Good luck Chris.

Posted on Mar 24, 2009

  • 22219 Answers

SOURCE: My citroen c4 with a 1.6 hdi engine judders when

the cold start device,its electronic so dealer only

Posted on Oct 30, 2009

  • 279 Answers

SOURCE: car wont rev

under the bonnet on the back of the mechanical pump there is a unit held in by 2 bolts
remove this unit and on the end there is a tiny filter
this will need cleaning because when the lift pump brakes down tiny parts of it get sucked up through the pipes and clog the filter
it may be best to feplace the fuel filter aswell

Posted on Dec 14, 2009

  • 1 Answer

SOURCE: egr valve problem on my citroen picasso have been

Did you get your egr valve problems sorted out. What effects was it having n the engine. I think I have a similar problem, need advice on how to clean it.

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Intake hose on egr valve had antifreeze in it

not a good sign. which engine, 8valve or 16v? MATTERS BIG TIME.
do you run 50% Antifreeze (AF) or just hope it dont freeze and crack the head.? (anything with AF in it can crack, anypart)
the EGR has only 3 ports.
1 is vacuum
the other 2 are exhaust.
my guess is that you removed egr, (you forgot to say)
and the black carbon ports , in valve dripped green AF.
that means the intake manifold is cracked, and AF is pouring
in to there, or the head is cracked.
end story.
if the vacuum hose (you didnt say ) is full of AF, that is near impossible. its a very tiny hose.
use this page to find the correct part, and say where it leaks exactly
or post photo of object.
8v or 16V?
the 8v EGR is below the TBI
the 16v is at the rear (MPI) intake manifold very hard to get to.

ill take a wild guess.?
and its 8 valve engine.
part #1 EGR leaks
or was it REALLY the ISC?
the ISC has 3 hoses, not 1, , one is air, 2 are AF (water)

post back and we can do other tests. like compression test
or radiator leak down test. (fumes test)(

Mar 31, 2014 | 1995 Geo Tracker

1 Answer

Immobiliser not working

i have a citroen c8 sx hdi 16v how can i fix this

Jan 04, 2014 | 2005 Renault 181

1 Answer

Turbo not working on peogeot 407 2l diesel hdi 16v 2007 sport car

Check egr valve system, check turbo boost solenoid, is it hot ? It should be war but not hot. Check turbo waste gate. Remove the black assy that hold the butterfly valves inside that the turbo air hoses connect onto to and make sure they work by sucking on the tubes to activate them, they are sring opened or closed and the engine vacuum system opens or closes them.

Dec 15, 2013 | 2007 Peugeot 407 2.0

1 Answer


take all the connecting pipes off and clean them

Aug 30, 2012 | Citroen Xsara Cars & Trucks

1 Answer

Citroen picasso egr valve needs cleaning

by taking the car on high way / motor way
hard drive for minimum 20-30 mins in lower gear.

Jul 02, 2012 | 2005 Citroen Xsara Picasso

2 Answers

How to set timing up on 1.6 Hdi engine without reluctor after cambelt snapped

please state year and model of this engine as they do change ,i think its a citreon something like a berlingo or maybe a 306 or whatever but need the year as the common rail is different to the injector pump model or is it a dreaded my favourite motor and thats a renault

Feb 29, 2012 | Citroen Cars & Trucks

2 Answers

Egr valve problem on my citroen picasso have been told i need to get new one as mine is on its way out other people say it might just need a good clean where do i find egr valve on a 2.0 hdi thanks oh and...

Did you get your egr valve problems sorted out. What effects was it having n the engine. I think I have a similar problem, need advice on how to clean it.

Aug 08, 2009 | 2005 Peugeot 405

1 Answer

Citroen dispatch with thick black exhaust smoke.

Try blanking off the EGR valve where it mounts on the exhaust manifild, they dont do much usefull but are unreliable and leak ehaist gasses into the inlet, also they take pressure off the torbo leading to over fuelling.

Aug 03, 2009 | 2006 Peugeot 604

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides