Question about 2004 Honda Accord

1 Answer

P1030 fault code on 2004 Honda accord - 2004 Honda Accord

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

Did you google that?
P1030 (p1 is factory code not a generic fed code)
P1030 Honda Intake Manifold Air Control Valve Position Sensor Lower Limit Not ReachedSorry for caps. but this is the html code off the scan pages.
open the FSM it answers the reasons and tests. to do.
do you only want wild guessing? we can do that. sure.

here is 1 wild guess.
you have intake air leaks.
or the valve is bad
or the switch is bad.
id not throw expensive parts. id do the steps.
see alldata.com for the 1030 page and the steps.
or go to handa and buy the FSM.
or join a true honda forum.

Posted on Oct 22, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: 2004 Honda Accord spark plug gap

.044 Happy New Year!

Posted on Jan 02, 2009

  • 14036 Answers

SOURCE: I have a 2004 Honda Accord V6. It goes into all

code po722 output speedsensor circuit malfunction.code po741 torque converter clutch circuit performance or stuck off.you can fix it if you have some basic mechanic skills.

Posted on Nov 18, 2009

  • 65 Answers

SOURCE: 2004 Honda Accord with codes P0706 and P1009

trans range senson circut p0706
O2 sensor needs to be replaced p1009

Posted on Mar 03, 2010

  • 623 Answers

SOURCE: I Have a P1704 fault code on my 2004 Honda accord

If you have a clutch this is the code: fault P1704=Clutch pedal position switch

Posted on Apr 28, 2010

coskuarsiray
  • 208 Answers

SOURCE: I have a Honda Accord 2004 with a code PO339, PO113 &PO344. can you assist in advice to solve these problems

p0339 is crank shaft position sensor related error. you need to be sure that its wiring is not damaged and it is not shorted somehow. if it is broken or getting broken, car may stall, or wont start att all.

p0113 is for intake air tempoerature sensor errors. that sensor measures air ehich enters the engine. it is least important. its effect may not be noticable when weather is not extremely cold.

p0334 is for knock sensor on engine. it prevent predetonation due to ignition conditions appear. it is felt when engine is under load like climbing, and engine speed is low. check for wires if it is ok replace sensor.

we can tell that temperature sensor is not directly effects other sensors.
but knock sensor and crank position sensor is to important for engine. if you have no starting issues, even cold or warm engine, invest on knock sensor first.

Posted on Nov 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 HONDA ACCORD 2.2 ICTDI FAULT CODE P1236


fuel pump out of control range, check fuel relay/ fuses then possibly the pump itself

Dec 20, 2014 | 2004 Honda Accord

1 Answer

Burning gas


run fault codes first check for HO2S sensor problems . Check the cat converter conditions Check fuel pressure in the manifold Check that the brake calipers are free to move on the mounting pins and not dragging on the rotors. Check that the hand brake is releasing fully and not dragging on the brakes.

Mar 01, 2014 | 2004 Honda Accord

1 Answer

2004 honda accord ex v6 just shut off while driving and the malfunction light light


A local Checker or Auto zone can retrieve the codes for you, it will give you an idea of what may be at fault.

Jan 30, 2014 | 2004 Honda Accord

1 Answer

2004 honda accord automatic gear jerking, what could be the likely cause and solution


Has the transmission control module been scanned for fault codes? This is an electronically controlled transmission. Do you have any flashing lights or a check engine light on by chance?

May 22, 2012 | 2004 Honda Accord

1 Answer

Honda accord 2004 drive light flashing?


this means that there is a fault with the transmission, u will need the dealer to test the TCM (transmission control module) to see what fault code is stored to determine the cause of the light.

Dec 29, 2009 | 2004 Honda Accord

1 Answer

I have a 2004 Honda Accord V6. It goes into all gears, but does not move. I have fault codes p0722 and p0741. Which of these could be my problem and can amateur fix it?


code po722 output speedsensor circuit malfunction.code po741 torque converter clutch circuit performance or stuck off.you can fix it if you have some basic mechanic skills.

Nov 18, 2009 | 2004 Honda Accord

1 Answer

Light is coming on


check your oil level it may be a vtec related fault code, failing that it will need to be plugged into a code reader.

Dec 30, 2008 | 2004 Honda Accord

Not finding what you are looking for?
2004 Honda Accord Logo

Related Topics:

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...