Question about 2006 Chevrolet Silverado

1 Answer

Changed windshield pump now it pumps when ever wipers are turned on. Push to spray works well but Cant get it to stop small pumps of water when wipers running. Did I install pump wrong? 1976 c10 chevy

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

1976?? not a 06.. the pump you installed was the complete kit and the cam is on the wrong lobe. make sure the wiper motor is in the park position before mounting pump and be sure the three wire+1 are not switched that is three on bottom 3 and one on the top of the four pins.

Posted on Nov 10, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

2 Answers

Windshield Solvent doesn't spray.Wipers work. I can blow air thru lines.But no spray..any suggestions? 1995 Chevy Luminia


Does the pump motor run when turn windshield spray?
Might be home in line.
Might be wrong fluid(too thick)
Might be wiper fluid motor broken.

Nov 03, 2016 | Cars & Trucks

1 Answer

Windshield wiper fluid won't spray high enough on windows. What could be the problem?


the small nozzle where the water comes out is actually a small ball and can be adjusted by inserting a small wire in the hole and moving it to where you want the water to spray to
it could be difficult to move as over time the ball corrodes into one spot in which , new sprayers are the fix

Feb 14, 2016 | 2006 Ford Taurus SEL

3 Answers

My 2006 Dodge Dakota windshield washer fluid does not spray. I checked the washer pump and it works. The fuses are all good. And the wipers work. When I press the windshield washer button inside the truck...


If the pump works, something should be flowing thru the hose to the spray nozzles.
And if the pump works, everything electrical is working.
How do you know the pump works ?

Apr 14, 2013 | 2006 Dodge Dakota

1 Answer

How to remove windshield washer pump


sounds like the spray nozzles are clogged you can usually remove them and soak them in soapy water or spray water through it with a sprayer on the end of a hose. if that doesn't solve it then you may have a cracked line or the pump that pumps it out may be broken but usually is the nozzles are clogged.

Sep 23, 2012 | 2002 Pontiac Bonneville

2 Answers

Windshield washers not pumping water to windshield


The most common problem I find in this season, is having summer 32 deg. F freezing windshield wiper fluid in the tank rather than -20 deg. F freezing windshield wiper fluid.

Try to warm up the car by parking it in a heated garage until the windshield wiper fluid thaws. Then, try to use it all up, and add the 'winter' vs. the 'summer' formula of windshield wiper fluid.

If this does not solve the problem, the pump might be burnt out, in my experience.

You should hear a humming sound as you depress the button for windshield wiper fluid inside of the car.

Good luck on this repair.

Jan 01, 2011 | 1999 Mercedes-Benz E-Class

1 Answer

Rear windshield washer works but front does not....Any suggestions? Washer fluid is full, fuses are good, wipers work but no fluid or sound of pump running when lever is used to spray fluid on front...


Probably need to replace the pump. Separate pumps for front and rear. Check with a test light to see if there is power to the pump. If it has power but won't work, replace the pump. If no power, you have a wiring issue. Be sure to turn the switch on and have someone push the washer button when you are checking for power. There won't be any until you push it to "wash".

Feb 01, 2010 | 2007 Toyota 4Runner

2 Answers

Windscreen (windshield) washer does not work but wipers work fine


This could be anything in between. Heres where I would start. DOES the vehicle spray water in any other speed? Do all speeds work?
If all speeds work fine the problem could be in the SENSOR controlling the actual Spray pump. NOT worth fixing. OR your wires going to the spray pump could be cut! Check the resistance real quick between the pump and the sensor. It also may be the culprit.

Jun 14, 2009 | 2004 Mercedes-Benz C-Class

1 Answer

Windshield sprayer won't work


when you turn on the sprayer you should hear a pump motor running, try this with the engine off and key on so u can hear better. if u dont hear the pump then check the fuse if its ok then u will need a new windshield washer pump. if the pump is running when u activate it check for a leak in the lines. if you hold the washer button down long enough and the pump is running then you will see washerfluid leaking from somewhare. have hood raised when doing this so you can see better.

Dec 18, 2008 | 2006 Ford Mustang

Not finding what you are looking for?
2006 Chevrolet Silverado Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...