Question about 2000 Mazda B-Series

Open Question

Motor diesel b2500

DIEZEL PUMP PIPE SEQUENS ON PUMP

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: b2500 turbo diesel fuel pump diagram

courier%20injector%20pump%20inlet%20filter.jpg Undo the fuel inlet Banjo bolt and carefully fish with a piece of wire bent at the end (as pictured) and fish out the filter (under the spring) wash and replace. Can be very fiddly, so patience is a must.a2cb1b7.jpgecc55b3.jpg

Posted on Dec 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed injector pump on isuzu nkr pick up


These are self bleeding so if diesel is getting to the pump it won't need bleeding. If you still feel the need to bleed the system then loosen one injector pipe turn the engine until you see diesel coming tighten again it should fire up. If you have a good flow of diesel coming from the filter to the pump and diesel at the injector pipe then your pump pressure may be low. To check remove any injector reconnect the pipe to it with the injector end where you can see it. Turn the engine with the starter a few times the diesel should be making a mist. Wear eye protection for this test

May 28, 2014 | 1995 Isuzu Trooper

1 Answer

What cause injection pump diezel not coming out 4gj2 isuzu


I would be checking the stop- solenoid on the pump if you have one . next check for air in the system and bleed it all out.

Apr 04, 2014 | 2000 Eagle Medallion

1 Answer

Injector pump leak


This will almost certainly be the plastic fuel pipes connected to the fuel pump replace both of them this is a common fault the rubber o rings on the pipes harden and leak make sure you prime the diesel filter after replacing these pipes the engine can be difficult to start on this model once air is allowed in the system

Nov 22, 2013 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

My 1999 mazda b2500 misfiring on cylinders number 1&2 diesel injectors fine . What could be the problem


Diesel ?? common rail or injector pump ,either way firstly i would suspect the head gasket as it sounds like its burnt through between cylinders one and two .This is the most connon fault with any engine

May 18, 2013 | Cars & Trucks

1 Answer

WAT IF BMW 320 DIEZEL HAS ABLACK SMOKE 2001 MODEL


I would have the injection pump tested for porper function. Since we do not have diesel BMW's in the USA that is about all I can suggest. Sorry

Jun 17, 2012 | Cars & Trucks

1 Answer

Timing the fuel injection pump


What is this, Mazda's do not have diesels in the USA anymore.

May 28, 2012 | 1999 Mazda B2500

1 Answer

Bmw 325tds diesel flowing back to tank when parked


usual problem ,valves in injector worn for the fuel pump.easy quick fix this one ,fit a non return valve in the inlet pipe,check flow direction on valve when fitting and evan better as well is another in the bleed off return pipe .valves available from a motor factor or a specialist garage like bosch or lucas ,cut pipe and fit the valve with a piece of rubber pipe to connect the valve in line.or listen to the people who want to milk the golden cow and have the whole injector pump overhauled .

Dec 23, 2009 | 2001 BMW 325

1 Answer

B2500 turbo diesel fuel pump diagram, motor want rev past 2000 rpm starving of fuel ,has fuel pump got am internal filter, i have changed fuel filter.


courier%20injector%20pump%20inlet%20filter.jpg Undo the fuel inlet Banjo bolt and carefully fish with a piece of wire bent at the end (as pictured) and fish out the filter (under the spring) wash and replace. Can be very fiddly, so patience is a must.a2cb1b7.jpgecc55b3.jpg

Nov 17, 2009 | 1997 Mazda B-Series

2 Answers

Ford f-350 6.0 diesel


It will get to the point it will not start. You have a bad o ring on the high pressurs oil pump sensor Ford has a kit for the fix

Jun 15, 2008 | 2005 Ford F 350 Super Duty

Not finding what you are looking for?
2000 Mazda B-Series Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...