Question about Ford Focus
I need a diagram showing were the lines run to and from the transmission oil cooler in a zetec
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Its fairly easy, you dont have to replace the fittings at the cooler. if they are leaking up at the cooler, it needs to be replaced, but if not, its just simple line to line, not too long of a process
please rate well! hope this gives you the info you needed!
Posted on Mar 01, 2009
Have it taken care of at your local shop. Its a pain to get to. Even the local shop said it was hard to replace... and they had it up on a lift. I had two replaced at 97k miles on my 2000 300m. You'll be glad u did. Good luck.
Posted on Oct 29, 2009
Take a small 90 degree pick. Inspect the fitting closely. Use the pick to "roll" the retaining clip off the fitting. The line will simply pull once this is done. U can install the clip first on reinstallation (inspect them closely) and then simply push the line into the fitting. It will "click" into place. Note u will have to orient the line perfectly to push in.
Posted on Nov 13, 2009
Tips for a great answer:
Dec 12, 2015 | 2006 Dodge Magnum
Apr 29, 2014 | 2002 Mitsubishi Lancer
Feb 08, 2014 | 1998 Chevrolet Lumina
Jan 07, 2014 | 2000 GMC Sonoma Extended Cab
Dec 16, 2013 | 2000 Oldsmobile Intrigue
Dec 13, 2013 | Cars & Trucks
Aug 01, 2011 | 1991 Nissan Stanza
Feb 14, 2011 | 1989 Oldsmobile Cutlass Supreme
Jan 02, 2010 | 1993 GMC Sierra K1500
Feb 28, 2009 | 1998 GMC Sierra
Nov 22, 2017 | Ford Cars & Trucks
16 people viewed this question
Usually answered in minutes!