Question about 1997 Ford Crown Victoria

Open Question

Engine light is on an a dead spot when acceleration

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dead spot in pedal when accelerate

Year, make, model, engine size????? Probably a bad throttle switch id it is always in the same spot.

Oct 20, 2014 | Cars & Trucks

1 Answer

Engine hesitation

I guess I could buy into the timing belt idea. But, if it runs ok all other times, its not the timing belt. Especially if it idles ok and has power once it gets going. How many miles on it? Is the check engine light on?

May 20, 2014 | 2011 Honda Pilot

2 Answers

Starts missing /large dead stop when accelerating

The missing while accelerating is likely due to ignition coils and/or spark plugs going bad. The missing while in park is a normal thing. The car has a rev limiter that will not allow the engine to rev to higher than 3000 RPM while in park.

Apr 11, 2014 | Lincoln LS Cars & Trucks

1 Answer

Flat spot on acceleration

Is the check engine light on? Check the air filter check the TPS

Jan 12, 2013 | 2000 GMC Jimmy

1 Answer

Vw beetle 2000 model flat spot when accelerating

Do you have a check engine light on? If not try this. Buy a can of Mass Airflow sensor (MAF) cleaner (about $6) from the auto parts store and clean the MAF inside, it is located in the air intake hose to the engine. It would also be a good idea to have the fuel pressure checked and to have a scan test done on the electronic engine control computer. Also replace the engine air filter.

Jun 27, 2012 | 2000 Volkswagen Beetle

1 Answer

When I accelerate my 2002 trailblazer it kinda stalls then kicks in later is it the throttle body or a sensor or?

Do you have the check engine light on at any time? If so, you need to get the codes scanned and make note of what the codes are.
It's possible the accelerator pedal sensor has a dead spot in it, causing the hesitation. It probably would be a good idea to have the throttle body cleaned (front side and back side).

Aug 20, 2011 | 2002 Chevrolet TrailBlazer

2 Answers

98 Ford Fiesta Encore engine cut out & lagging acceleration

well it sounds like its time to change the timing belt.

Jul 12, 2010 | 1998 Ford Escort

1 Answer

2001 Ford F650 with 7.2 Cat deisel acceleration problem

Check your TPS Throttle positioning sensor. Sounds like it has a dead spot in it or it is failing. May also be a wiring harness issue or loose connection at TPS too! If its intermittent then it will soon go out completely. It should be located on your fuel pedal. Remove it and check it with an ohm meter. Check resistance all the way thru from 0-100 percent. When it is not working it should do nothing and show no resistance. When it is working the resistance value will increase and or decrease as you turn the sensor.

Feb 21, 2010 | 2001 Ford Super Duty F 450

1 Answer

Engine stalls

might be something simple as a wiring problem.. or the truck isnt producing the ryte amount a fuel pressure

Jun 02, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
1997 Ford Crown Victoria Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides