Question about 2007 Chevrolet Malibu Maxx LTZ Hatchback
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First of all, make sure your iginition switch is completely in the off position or your radio will stay on. I had problems with this and all I had to do was make sure my shifter was locked in the park position (try jiggling it around in park until it clicks). If that doesn't help, the fuse for the radio is located on the passenger side of the vehicle on the side of the dashboard- you have to open your door to access it.
Posted on Dec 18, 2008
I just got the code for my radio by calling 1-800-537-5140 and choosing the option for my vehicle make. 1 for chevrolet. then i entered 106010 for the customer # and then entered my serial # from the stereo and it gave me a lock code for free. Now i am just trying to figure out how to enter it since my manual tells me to take it to the dealership. Now that you have your 4 to 6 digit code, you can enter it by following the these steps. 1. Make sure your ignition is in the "on" position, but no started. 2. Press/Hold the "HR" button to set the first 2 or 3 numbers. 3. Press/Hold the "Min" button to set the next 2/3 numbers. 4. Press the AM/FM button one time. "SEC" should be displayed. You can now turn the radio on. Good luck!
Posted on Oct 28, 2009
if you hold the 1 and 4 presets and you get 3 lines like this - - - then that meens there is no code stored so the problem is not in your theftlock but the radio or power to it.
Posted on Dec 27, 2009
both codes refer to the throttle position sensor, the sensor is at the throttle plate, on the side of the throttle body. to test remove the connector to sensor, use a ohms meter to test. put 1 lead to top connection and the other to the bottom one. move throttle and the needles on the ohms meter should move very even, move throttle slow to get a good reading, needle should move without no hesitation, if the test is bad replace tps sensor. if the sensor gets to bad, it can have an effect on transmission shifting. after fixing sensor have the light turned of with an obd2 scanner.
Posted on Feb 20, 2010
Tips for a great answer:
Mar 13, 2016 | Cars & Trucks
Feb 15, 2015 | Chevrolet Malibu Cars & Trucks
Dec 14, 2014 | 2007 Chevrolet Malibu
Sep 18, 2014 | 1998 Chevrolet Malibu
Mar 02, 2010 | 2007 Chevrolet Malibu SS Sedan New Cars
Dec 27, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars
Oct 28, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars
May 07, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars
Dec 07, 2008 | 2002 Chevrolet Malibu
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: