Question about 1995 Ford Escort

Open Question

Pcv valve location 1996 ford 1.9l - 1995 Ford Escort

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 92 Answers

SOURCE: 1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location

the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.

Posted on Oct 21, 2008

  • 1 Answer

SOURCE: pcv valve :where is it located on a 1999 ford explorer sport 2wd

It is located at the back of the engine near the fire wall. It is gray with a T connector at the top with two hoses coming off of the T and going forward into the intake manifold.

Posted on Mar 07, 2009

Monster80
  • 460 Answers

SOURCE: What is the location of the PCV valve on a 2005

Its in the back of the intake.It points straight towards the windshield way.It has a black hose that comes off from it..If your standing in front of the car looking down at the motor at the middle of the motor look straight back and down just after the intake starts to round down you'll see it..

Posted on Mar 30, 2009

  • 38 Answers

SOURCE: location of pcv valve on 1992 ford f150

Which engine??? 4.6 and 5.0 liter rear of passenger valve cover

Posted on Nov 28, 2009

mitchbtu
  • 121 Answers

SOURCE: Where is pcv valve located on 2005 taurus

It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Posted on Jan 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

3 Answers

Where is the pcv valve located on a 1999 ford explorer? Is there a picture?


PCV BasicsPCV stands for Positive Crankcase Ventilation.
All car engines have a PCV valve and it is located on top of the motor's valve cover. There is a vacuum line attached to it. It pulls out of the valve cover and if you shake it, you should hear a marble knocking inside it. If you shake it and don't hear anything, it's bad. It costs less than 5 bucks to replace.

Location
  • 4.0L is located in the valve cover near the brake booster

  • 5.0L is located behind the intake manifold (engine rear)

Oct 04, 2009 | 1999 Ford Explorer

2 Answers

Location of pcv valve on 03 ford focus


http://www.focushacks.com/images/pcv.jpg
Here's a picture to locate it..
So, when looking at the engine from above, on the right of the exhaust.

Procedure to replace it
1) Lift and support the front end of your car, or drive up on ramps
2) Get under the front of your car. The PCV Valve is located behind the exhaust manifold, a few inches below the valve cover.
3) Push up on the PCV valve to pop it out of the tube, or pull. You can get it out of the rubber tube with some effort.
4) Remove the rubber elbow from the top of the PCV valve. This can be re-used if it's not squishy. It can also be replaced cheaply.
5) Put the elbow on the new PCV Valve
6) Re-attach the elbow to the PCV tube
7) Push the new PCV valve back down into the large rubber tube

Sep 25, 2009 | 2003 Ford Focus

1 Answer

Can anyone tell me (or show me a picture) of where the PCV Valve is on my 1996 ford Taurus?


PCV Valve is in the end of 1/2" or so size hose inserted into a rubber grommet in the top of one of the valve covers. I believe it's on the passenger side closest to the firewall.
If you have the 24 Valve engine, the PCV valve is on the drivers side of the engine compartment, if you're facing the front of the vehicle, just under the air intake hose. Its not directly on the engine but rather in line with the oil separator tube/hose. Follow the black accordion tube from the air cleaner to the throttle body valve. Place your hand on the bottom of the throttle body and you will find the PCV attached to two short rubber hoses. Hand access is limited, so you have to feel for the PCV and blindly remove the hoses from the PCV. Be patient, and allow time to finesse the new PCV onto both hoses.
I recommend purchasing this molded new hose for a few dollars from your Ford dealer. They tend to clog or collapse after several years. The whole process can be done in 15 to 30 minutes and save you a lot.

Good luck and hope this helps. keep me posted

Jun 20, 2009 | 1996 Ford Taurus

1 Answer

Need location


The PCV valve for a 5.0L is located below the upper intake manifold in the rear. It is locate in the lower intake manifold in the rear right below the upper intake manifold. It is really hard to see but if you get a mirror you can probably see it.

Apr 12, 2009 | 1996 Ford Explorer

1 Answer

1996 nissan pcv valve location


I am used to the PCV valve being in the valve cover so I ran into the same problem myself on my 96 hardbody it is located down near the oil filter you will have to go in through the passenger front wheel well take off the splash guard and you may have to make a little room by disconnecting an electrical bracket and I believe it is a 19mm wrench.Hope this helps

Feb 07, 2009 | 1996 Nissan Pickup

2 Answers

Pcv valve location


it is normally located on the valve cover itself look for the black tube going into the top of the valve cover gasket

Feb 04, 2009 | 1999 Ford Windstar

1 Answer

Where is the PCV Valve located on the 1996 4 cyl Cavalier?


the thumbscrew with a hose coming out on the pass. side of your valve cover

Jul 17, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1995 Ford Escort Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...