Question about 2008 Buick Lucerne

Open Question

Where to hook jumper cables ? - 2008 Buick Lucerne

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 98 isuzu rodeo and my friend hooked up the jumper cables wrong one day and now none of my dash lights or any of the switches on my dash work (4x4, cruise control, etc.) and it's stuck in 4x4


What can be damaged by hooking jumper cables up the wrong way ...

https://answers.yahoo.com/question/index?qid..
May 3, 2011 - My car battery was dead so we asked someone for a jump and when we tried starting the car, the negative jumper cable on my car started ... what happens when you hook up car battery cables wrong?
Apr 12, 2013
Hooked jumper cables up wrong and radio won't work, why?
May 26, 2010
Hooked up jumper cables backwards now my car wont start no ...
Apr 2, 2009
What happens if you hook up jumper cables backwards on a car ...
Oct 4, 2008
More results from answers.yahoo.com

Do not connect your jumper cables backwards or bad bad ...

https://www.reddit.com/.../do_not_connect_your_jumper_cables_...
RedditOct 25, 2012 - Do not connect your jumper cables backwards or bad bad things ...What I'm trying to say is, does this usually happen when you hook the cables upwrong? ... So basically there is only one way to find out for sure what going to .

Oct 16, 2015 | Isuzu Cars & Trucks

2 Answers

2001 Mazda protege radio and lights in car not working after jumper cable s were hooked up backwards


Connecting jumper cables the wrong wat around most likely has damaged electronic components such as a radio and computer.
Check the fuse box and replace any blown fuses.
If you still have problems then get an auto electrician to fix your car.

Mar 06, 2013 | 2001 Mazda Protege

1 Answer

Trucks been rolled , now won't crank


Try this.
Take a positive battery jumper cable and hook it directly to the big lug terminal on the starter solenoid that the cable hooks to from the battery.
Take the negative jumper cable and hook it to a good steel, iron, or aluminum ground connection right by the starter, on the motor.
Now try the key to start it.
If it still says nothing, I'm thinking you have some wire harnesses unhooked from the rollover.
Someone really good could take a little jumper wire and connect the tiny terminal on the starter solenoid (which goes to the key switch), to the positive battery cable, and that should make the starter work, hopefully.
If it cranks with this direct application of power to the starter, be sure and check the "ground straps" between the motor and the frame. I think there are about 3 or 4.
Some may have snapped.
Be blessed.

Feb 05, 2013 | 2001 Chevrolet S-10

2 Answers

Truck will not start how can i tell if its a starter or selonoid


does it spin real fast without clanging and grinding against the flywheel? if so then its probably the solenoid bad. do you have to hit the starter with a hammer then it works? it is probably bad brushes or a worn motor. eather way i think you can only get a new starter and solenoid together not sold seperate. check for bad battery cables (loose).

May 30, 2011 | 1996 Chevrolet K1500

2 Answers

2005 Corvette stored in garage with no battery tender hooked up, now battery is dead. How do i gain access in the car to release the hood to hook up a charger?


Usually you can energize the electrical system by making a mini set of jumper cables using a lamp cord and alligator clips. attach one end to a battery and attach the ground to the starter housing or any metal bracket, the positive lead to the main terminal on the starter. (don't mix up the lead ends...mark them so you can identify them.) Do not try to start the car with this attached. light wire won't handle the amperage.

Feb 03, 2011 | 2005 Chevrolet Corvette

1 Answer

I need to jumpstart and cant find the battery...


The battery should be on the right hand side of the car, in the engine compartment, remember when you jump start it to hook up the jumper cables like this; negative jumper cable to negative battery terminal on your car, then positive jumper cable to positive terminal on your car, then, put the other positive jumper cable to the car that's jumper car and last connect the other negative jumper cable to the jumer cars engine block, and that should help you.

Jan 16, 2011 | 1995 Chrysler Sebring

3 Answers

I hooked up jumper cables to what appers to be the fuse box under the hood... now I have a bad electical issue all these things don't work: radio, interior lights, Running lights, power windows, seats, nor...


Hi! I am having the same problem. My brother hooked the jumper cables to the fuse box now all the things that went wrong with your car isn't working in mine! Please help! I have a 2002 GMC envoy. What did you do to your car to make it work again

Dec 21, 2010 | 2003 GMC Envoy

1 Answer

I have a gmc 1998 turbo diesel that cranks but wont turnover or try to..i have replaced the supply pump as well as the inline pump..what can i do to get my truck started ..thank you ?


TURN OFF RADIO FIRST TO KEEP FROM LOCKING IT OUT WHEN YOU DISCONNECT NEGATIVE BATTERY CABLE. SOUND LIKE WEAK BATTERY OR STARTER MAKE SURE BATTERY CABLES CLEAN AND TIGHT.IF BATTERY GOOD REPLACE BATTERY CABLES.CHECK STARTER MAKE SURE STARTER SOLENOID AND STARTER OKAY.YOU CAN HAVE THEM TESTED AT AUTO PARTS STORE OR USE A REMOTE SWITCH.REMOVE STARTER FROM VECHICLE USE JUMPER CABLES.HOOK NEGATIVE GROUND CABLE TO BATTERY NEGATIVE THEN GROUND STARTER BODY WITH NEGATIVE BATTERY JUMPER CABLES HOOK POSITIVE JUMPER CABLE TO BATTERY POSITIVE AND STARTER POSITIVE TERMINAL.THEN HOOK REMOTE SWITCH TO STARTER STARTER SWITCH AND OTHER REMOTE WIRE TO STARTER POSITIVE TERMINAL.PRESS REMOTE STARTER WILL SPIN IF GOOD.MAKE SURE INJECTION PUMP STATIC AND DYNAMIC IS TIMING CORRECT BEFORE STARTING TRUCK.

Dec 07, 2010 | 1998 GMC Sierra

2 Answers

2003 S TYPE JAGUAR. DON'T DRIVE OFTEN BATTERY


You must charge the battery or you can use jumper cables from another battery to your battery to activate the electric trunk release, just be sure you hook up the jumper cables correctly ( cable to + on the battery and black to _ terminal of battery)and wear safety glasses when hooking up cables this should release the trunk. Also as a precaution always hook up + or red jumper cables wires first to prevent a arcing spark which is not terribly dangerous but this order in which to connect jumper cables is recommended.

Oct 10, 2009 | 2003 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...