Question about Cars & Trucks

Open Question

What is the fule pressure spec on a nissan pathfinder 08 . 4.0l

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why am I losing power in my injectors on my 1991 Nissan pathfinder?


Low fuel pressure? Have your fuel pressure tested with the engine running. It should maintain a steady pressure. If you have multi-port injection, it should be around 40 psi or whatever Nissan calls for, but if it is dropping from specs, either fuel pump or filter is not delivering enough gas to the engine.

The electrical power for the injector circuit should not be a problem. The engine computer pulses the injectors through the ground side of the injector circuit, and the power for the injectors is from a fuse that has power when the key is in on, or when the ignition is on, in other words.

Jan 30, 2016 | Nissan Cars & Trucks

1 Answer

How to reset my tpms light on my 2008 nissan pathfinder


Usally after setting your tire pressure to specs. and driving your vechicle for a mile or so it should reset it self. If not try disconnecting the negative battery post for a few minutes. Worse case scenerio take it to your tire dealer. Good luck

Mar 15, 2013 | 2008 Nissan Pathfinder

1 Answer

My car starts without problem but suddenly stops on the way and very difficult to start afterwards


This canbe due to a faulty fuel pump or a failure of the HT circuit when the engine warms up or the circuit warms up.
The fuel pressure can drop when the temperature goes up in the engine so check the fule pressure when the engine stalls.
Secondly check the HT int he spark plugs when the engine stalls to confirm if there is loss of LT or failure of the HT coil or HT wires.

Apr 09, 2011 | 1994 Nissan Pathfinder

1 Answer

No fuel getting to engine


if you have hit a big bump you may find the fule shut off velve has cloced down this shuts off the fule pump, just find it and reset it and the pump will work again

Oct 17, 2010 | 1989 Nissan Pathfinder

1 Answer

95 nissan pathfinder, was driving fine then died while driving,now wont start,but cranks over


sounds like a fule filter got cloged a new one is about $15.00 at autozone try that and see what happends also check vaccume leaks

Apr 23, 2010 | 1995 Nissan Pathfinder

1 Answer

Hello, I have a 1999.5 pathfinder and we had the timing belt and head gasket changed last year. Ever since we have had problems with it being sluggish to start and idling rough sometimes. In the morning...


Try measuring fuel pressure, if out of specs it could be the problem. should be 34 psi with the vacuum line at the fuel pressure regulator plugged in and 43psi with it unplugged. If out of specs. you'll need a pump.

Mar 08, 2010 | 1999 Nissan Pathfinder

1 Answer

What is the torque specs on a 1990 nissan pathfinder cluch.


If you are talking about the pressure plate to flywheel bolts, the torque is 16 to 22 foot pounds.

Feb 14, 2010 | 1990 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...