Question about 2005 Mercedes-Benz Mercedes Benz G55 Amg
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Go to autozone and ask them to put it in for you..lol or o'reillys. Youd be surprised at how much they will help you if you ask, It would be hard for me to tell you how, but under your hood on each side of your radiator, you can probably see back of headlight. If not it may have to be removed, just look how it is held in place, If I didn't help you I will if you will provide me more info, I do this for free to help people, please give a me a good rating, I don't have anything to gain by trying to help but for a better rating
Posted on Dec 19, 2008
that appears to be a camshaft position sensor performance code. you can start by checking to see if the sensor is working properly, re-check and make sure that the harness is ok by checking the resistance through the harness if all looks well there make sure the computer has the latest software on it by having it scanned at your local dealer. also you can check the reluctor wheel on the camshaft for damage or debris in the way of the sensor.
hope this helps!
Posted on Feb 17, 2009
SOURCE: 2005 mercedes benz 320 diesel
These instructions will work from 09/01/2003 and up 211 Model E Class Mercedes
1. Insert igntion key, switch to position "1"
2. press the page button (looks like a page in front of another page. Use the one with the writing on the rear page) on the steering wheel controls repeatedly until the mileage is displayed within the multifunction display.
3. Press the cluster illumination button 3 times in short succession. The battery voltage will be displayed.
4. Press the up or down arrow buttons until the service menu appears.
5. Use the + and - buttons to select the menu option "confirm"
6. Press the page button on the steering wheel until " complete service" is selected.
7. Confirm "Complete Service" with Page Button. The display will show "Service Confrimed"
Posted on May 29, 2009
Try this, it is the procedure
for resetting the ASSIST computer on many Mercs
1...Turn Key to position No:2 in the ignition / steering lock and immediately press AND Hold the button "000.0" (the trip reset button) TWICE within the space of 1 (one) second.
2…Turn the key to position No: 0 in the ignition / steering lock. Then release the button.
3...Press AND Hold the button "000.0" (the trip reset button) and turn Key to position No:2 in the ignition / steering lock. Keep button pressed
After about 10 seconds the service indicator will reset and an acoustic signal may briefly sound
That should do it....Good Luck…...Let me know if it works?
Posted on Jul 08, 2009
You will need a code reader/scanner called OBD2. They are under $50. A nice one can cost $100-$3,000. Just buy one that does the job...no need for the more expensive ones. You can borrow one from some auto parts stores, like the AutoZone.
You can also pay a shop this much to do it for you, every time.
Just select erase codes, and you're done.
Posted on Jan 21, 2010
Tips for a great answer:
Apr 29, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Feb 27, 2014 | 2005 Mercedes-Benz Mercedes Benz SLK350
Dec 18, 2013 | Mercedes-Benz Mercedes Benz G55 Suv 12v...
Nov 19, 2012 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Jun 23, 2011 | 2005 Mercedes-Benz Mercedes Benz CL55 Amg
Apr 12, 2011 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
May 26, 2010 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Aug 13, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
140 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: