Question about Cars & Trucks

Open Question

Chrysler 300 turn signal switch - Cars & Trucks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1071 Answers

SOURCE: I have a chrysler 300 touring with turn signal problems

switch is worn out prematurely

Posted on Jul 29, 2009

clifford224
  • 1975 Answers

SOURCE: 2002 Chrysler 300 M...Turn signals

It's located behind the center instrument panel. I also believe that there is a headlamp flash relay there as well so don't get them mixed up. the one you are looking for should have a wiring coming from it. I gave you a picture below of an aftermarket one so you get the idea. I hope that's the problem and not in the wiring itself. I hope this helps and good luck.


clifford224_207.jpg

Posted on May 04, 2011

kevin_getz
  • 1031 Answers

SOURCE: How to repair turn signal switch that will not turn off automatically on a 2005 Chrysler 300?

In some models, you have to remove the upper and lower steering column covers to access the multi-function switch. If you're lucky, once you remove the covers, you will see the access screws that anchors the switch to the column. Unscrew the screws, disconnect the electrical leads and remove the switch.

Posted on May 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the windshield wiper and turning signals connection located?


The turn signal/wiper multifunction switch controls are contained in the switch assembly. The wiring to both is plugged into the back of the switch inside the steering column covers. These switches have a high failure rate.

Aug 22, 2015 | 2005 Chrysler 300

1 Answer

Problem with electric on chrysler 300, turn signals and wipers wont come on, traction control kicks off and on.


Sounds like your turn signal/wiper switch on the side of your steering column is having problems. Like you said, it could very well be your computer. There is no way to reset the computer without the right software tools. I would try wiggling the switch to see if you can get it to work momentarily, if they work for a split second, then you know your switch is bad.

Nov 24, 2014 | 2007 Chrysler 300 Touring

1 Answer

2007 chrysler 300 stuck in park how to get it out of park


Could be the brake switch or the lock solenoid among other things.
You could try moving the shifter before you turn the key switch to the on position.
The brake pedal sends a signal to the shift lock solenoid to unlock it.
That circuit would need to be checked.

Apr 19, 2013 | 2007 Chrysler 300 AWD Sedan

1 Answer

Turn signal fails to return to normal position


Usually a problem with the return catch in the steering column. On most models there is a metal tab on the shaft that strikes the tabs on the switch.
You might be able to remove the turn signal switch and check it out.

Dec 19, 2012 | 2006 Chrysler 300

1 Answer

How to repair turn signal switch that will not turn off automatically on a 2005 Chrysler 300?


In some models, you have to remove the upper and lower steering column covers to access the multi-function switch. If you're lucky, once you remove the covers, you will see the access screws that anchors the switch to the column. Unscrew the screws, disconnect the electrical leads and remove the switch.

May 24, 2012 | 2005 Chrysler 300

2 Answers

My 2005 chrysler 300 touring, the blinkers do not turn off automatically when i make a turn


Hello,
Sound like problem with clock spring. So kindly replace the clock spring.
I hope it helps.
Thanks

Jun 27, 2011 | 2005 Chrysler 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...