Question about Kia Cars & Trucks

Open Question

Which fuse to remove to disable 2007 sportage factory alarm

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: FACTORY ALARM GOES OFF INTERMITTINGLY.

TO DEALER NEXT DAY. SAID CKED. ELECTRICAL SYSTEM AND FOUND NOTHING WRONG, NO CODES! MUST RETURN FOR TEMP. SENSOR PART AND WILL SHOW YOUR SUGESTION/OPINION/SOLUTION TO SERVICE. AT THIS TIME, CAN SAY "THANK YOU SOOO MUCH FOR TRYING/RESPONDING" WILL GIVE IT A "SHOT"

Posted on Aug 31, 2008

Ad
  • 1348 Answers

SOURCE: 2002 Toyota camry factory alarm

get a used one.it can be reprogrammed with the obd2 system for 100 bucks.

Posted on May 15, 2009

  • 155 Answers

SOURCE: Can you disable car alarm in 1991 Acura Legend by

If it's a cheap aftermarket alarm, check for a red wire coming off the hot side of your battery with an inline fuse. If it's not, try to locate the alarm "computer" under the driver's side dash or nearby your fuse panel. You'll find a black box with a wiring diagram glued to the side, normally strapped to a wiring harness or other fixed element. If this is the type of alarm you have, you'll need to trace each wire coming from the alarm computer and unclip each fastener that's clipped to your vehicle's factory wiring. The trouble with these types of alarms is that they can get power from a number of sources (stereo, interior lights, etc.). Good luck with this one!

Posted on Jun 12, 2009

rteemon
  • 578 Answers

SOURCE: 2000 Astro Van factory alarm activates and won't start

dont not cut any wire find a alarm technician and ask them disable for you unit is link to vEhicle ECM DONT CUT AND FOR THE SAKE OF CUTTING MAKE SURE THIS DONT BY SOMEONE WITH KNOWLEDGE

Posted on Aug 07, 2009

  • 32 Answers

SOURCE: 97 toyota 4runner factory alarm not allowing to start

lock your doors and close it wait till alarm resets and then unlock door with key and this should take care of you problem

Posted on Jan 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fuse for disarming alram system


There isn't one the alarm if factory fitted is integrated into the ecm so to disable the alarm you would need to disable the engine control module

Jan 25, 2017 | Cars & Trucks

2 Answers

Fob still won't work after new battery and nothing wrong with the contact inside, do not hae original code for the Kia sportage 1998 so what is the next best thing ,to do?


When replacing the key fob battery there is no reprogramming required! If the key fob was working prior to the battery replacement then it would point to the contacts not being correct! Remove key fob battery and start again!

Dec 31, 2014 | 1998 Kia Sportage

1 Answer

How to disconnect the alarm


Depending if it is a aftermarket or a factory alarm, they should all have fuses that can be removed. By removing the fuse, you may lose your keyless entry option. Most aftermarket alarms have a siren that is usually mounted under the hood in the engine compartment area. I've seen where people have cut the wire going to the siren to disable it but keep the power going to the alarm system to keep the keyless entry still functional if it came with the alarm system.
Factory alarms usually use the existing horn for the alarm. If that is the case, you might need someone who is experienced to disable the circuit so that the horn will not sound if alarm goes off but the horn will still be functional when needed. Hope this helps.

Dec 20, 2014 | Cars & Trucks

1 Answer

My 2007 golf immobiliser will not deactivate the alarm with the key fob, i have re coded it still nothing, removed the fuse and its fine. central locking also doesnt work. all factory fitted stuff.


its a 2007 model and as such can have the key fob reset with dealer diagnostic software ,wouldnt have thought removing a fuse would de-actrivate the factory immobilisor though

Apr 09, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

How to disable alarm


Find the alarm's fuse. It may be in the fuse box, usually located below the steering wheel to the left. Many cars also have other fuse boxes (sometimes three or even more) inside the engine compartment. If it's an aftermarket alarm (installed after the car left the factory), you'll find the fuse under the hood, usually on a wire connected to the positive battery terminal.


Locate the fuse that has the alarm label. You should find a fuse diagram on the lid of the fuse box. An aftermarket alarm won't have any label. Don't worry; removing the wrong fuse won't cause any damage. If you pull out a fuse and the alarm stays on, put that fuse back in and try another.

Pull the alarm fuse with the fuse puller (sometimes found in the fuse box) or a pair of needle-nose pliers. Sometimes you can remove a fuse using your fingers.

Dec 13, 2010 | 1998 Dodge Stratus

1 Answer

I have a 1993 jeep Cherokee and the alarm is going off and i can't start the car.


If it's not a factory alarm locate the alarm unit and the main power line running to that alarm and remove the in line fuse from that line. That will disable the alarm and should disable the starter kill switch that is installed.

Sep 20, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Hi there, The car alarm on my 2007 Camry keeps going off randomly. I don't really want a car alarm. How do you disable it? Thanks, Richard


can you check under hood, there is a fuse box, remove fuse box lid, inside is printed names of circuits if you have an alarm circuit , remove that fuse, then check if car starts and runs, if so, alarm is disabled.

Jun 13, 2010 | 2007 Toyota Camry

2 Answers

Lost remote to disable alarm on 2000 mercury villager how can i disable it and start my van


If you have the factory alarm system, you can put your key into either door and lock and unlock the door, that signals the computer to deativate the alarm. If you have an aftermarket alarm system installed, it will have to be removed and the wiring that the alarm ties into must be restored to factory design.

Apr 23, 2010 | 2000 Mercury Villager

1 Answer

19977 buick Lesabre limited all lights come on,wont start


factory alarms have fuses too. try looking in the fuse box... remove the fuse and it'll disable the alarm...

Jul 19, 2009 | 1997 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...