Question about 1995 Dodge Dakota
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
IF you have a chrysler 727 trans it's on the left rear corner of the case just above the trans pan (has 3 wires on it) If you have an asi trans, I'm not sure where they put it but I'd look around the linkage going into unit and on the other side (like jeeps have)
Posted on Feb 25, 2009
That makes sense. The oil pump for the transfer case runs from the driveshaft, and the one for the trans runs from the engine. If you put the trans in neutral, then parts of it may be turning without lubrication.
Other things to watch on those trucks:
The electrical power goes through a splice near the battery and gets corroded.
Transmission lines tend to rust out near the tranny in salt country.
Posted on May 19, 2009
If your going to put the front wheels on a dolly then it won't matter whether or not the front end is in neutral,if the rear is going to be lifted then it is a good idea to remove the drive shaft,this will keep the transmission from turning.
Posted on Apr 05, 2010
We don't have that info
Try a local trans repair shop
They usually install a salvage yard unit,
so be careful what you ask for & get
Not too hard to do yourself,once you get it out
Posted on Oct 05, 2012
Tips for a great answer:
Jan 25, 2017 | 2005 Dodge Dakota
Jan 29, 2016 | Dodge Cars & Trucks
Sep 16, 2012 | 1995 Dodge Dakota
Sep 02, 2011 | 2005 Dodge Dakota
Jul 28, 2011 | 1992 Dodge Dakota
Jan 13, 2011 | 2000 Dodge Dakota Quad Cab
Sep 09, 2010 | 2001 Dodge Dakota
Feb 25, 2009 | 1993 Dodge Dakota
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: