SOURCE: how do i reset the change engine oil light on a
Turn your key to the on position(do not start), then push the throttle pedal to the floor three times, turn of the ignition, wait a second or twothen start the engine, this should reset it. Works on the 2000 Tahoe LT 4WD
SOURCE: how to reset the computer on a tahoe when you
Very simple. 1 turn the key to "on" 2 press you accelerator pedal all the way down 3 times 3 press the pedal down 1 more time and hold for a total of 4 times and wait for the display to reset 4 turn the key off and turn back on to verify it has reset. That's it!
SOURCE: how do i reset oil change light on 2010 escalade
with the key to the "on" position (when all of your instrument panel lights come on) but do not start it. Push the gas pedal to the floor 3 times. On the third time hold the gas pedal down until your indicator light says "Oil life reset". Then turn the key the rest of the way to start the car and then it is complete. Don't forget to rate me!!!
SOURCE: how to reset change engine oil light after replace
Press setup button until you see remaining oil life message (it will say like 9% or something) so the message will kind of look like this
Oil life remaining
9%
Hold reset for new
When you see this, hold the reset button. This will reset the oil life to 100%
SOURCE: I have a 2010 mazda
Read the owners manual. If it doesn't say in there, call the dealer and ask them to explain it to you.
353 views
Usually answered in minutes!
×