Question about Scion Cars & Trucks
I can't take off the case that is covering the air filter so i can replace it, any suggestions
My tc hac a cold filter that runs down behind the head light, but before i changed this, there should be clips or # 10 mm bolts that hold it down.
Posted on Nov 05, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It should fit properly, you need to take it back to the auto part store. Because they must fit properly. So if your auto part store is saying no, then you need to go to another auto store. It has to clamp down.
Posted on Nov 11, 2009
SOURCE: 2004 Impala Air Filter Removal
I generally remove the rubber boot behind the filter to the intake housing. should be two hose clamps. Unplug the two wires pluged into the boot and slip it out of the way. They don't give you enough room to get the filter out with. This gives you about 4 inches of extra space.
Posted on Jan 17, 2010
Tips for a great answer:
Mar 28, 2014 | Peugeot 207 Cars & Trucks
Locate the cabin air filter container on your Lincoln LS. Looking at the engine from the front, you will find the casing on the left side against the back firewall. The cabin air filter is mounted vertically and is approximately 6 by 9 inches and about 2 inches deep.
Remove the cowling cover by pushing in the black cover pins and lightly prying the cover off with a screwdriver. Lift the filter out of the container.
Vacuum the inside of the container to remove any dust or debris. Wipe down the inside and outside of the container and lid with a clean damp cloth, then dry it off completely.
Insert the new cabin air filter into the container and check to make sure it is seated properly. Cover the container by putting the lid back on and gently pushing down to make sure the pins click into place.
Jun 02, 2011 | 2001 Lincoln LS
Dec 11, 2010 | 2000 Mazda MPV
May 25, 2010 | 2003 Ford Expedition
Mar 07, 2010 | 2006 Volkswagen Passat
Oct 09, 2009 | 2006 Toyota Corolla
Sep 27, 2009 | 2007 Honda Accord Sedan
Feb 14, 2009 | Mercedes-Benz 350-Series Cars & Trucks
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: