Question about Mazda Millenia

Open Question

What is the bolt sequence main bearing caps for a 2002 Mazda Millenia 2.5L V6 engine?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: An automatic 2002 Mazda Millenia V6 2.5L is stuck in park

When you experience this problem, check to see if your brake lights are coming on. It could be as simple as a brake light switch malfunction. If the brake lights are functioning as the problem is occurring then you could for example have a problem with the shift interlock solenoid.

Posted on Jul 28, 2009

  • 66 Answers

SOURCE: 2002 mazda millenia mass air flow sensor

Look in the oulet air cleaner tube, it's hold by 4 nuts.

Posted on Sep 16, 2009

Testimonial: "Thank you so very much for your assistance. I wish i could ask you alot of other questions!!"

  • 27 Answers

SOURCE: i need all torque specs main bearing caps

haynes manual is the best way

Posted on Oct 07, 2009

  • 1201 Answers

SOURCE: When do I have to change timingbelt for Mazda millenia 2002?

usually around 60,000 miles or 48 months, which ever comes first.

Posted on Nov 10, 2009

Testimonial: "Thank you!"

johnjohn2
  • 5763 Answers

SOURCE: 2004 mazda 6 3.0L V6

Okay, the main bearing caps only have 10 bolts, i think your looking for the connecting rod caps, they have 16 bolts, i will list them both, theres a tightening sequnce for the main bearing caps, these are the caps that hold the crankshaft to the engine block, the connecting rod caps hold the pistons to the crank and they have 16 nuts,For a 2004 mazda 6 with the 3.0 engine the torque specs are as follows.
Connecting rod bolts step 1) 19.2 - 23.6 ft lbs.
step 2) tighten an additional 80 - 100 degrees

Main bearing caps step 1) 32.5 - 33.9 ft. lbs.
step 2) tighten an additional 175 -185 degrees.
heres a diagram for main caps to tighten in order.
hope this is helpful.fc3bff9.gif

Posted on Aug 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Main bearing torque specifications connecting rod crank shaft mazda protege 2002 2.0liter


Main Bearing Cap Bolts - 2 Steps:
Initial 15Ft Lbs; +90degrees more of bolt head rotation.

Nov 15, 2016 | Mazda Cars & Trucks

1 Answer

Tercel 1992 main bearings torque


The Main Bearing Cap TorqueTo install:
  1. When reassembling, clean the bearing caps and journals in the block thoroughly. Coat the bearings with a liberal application of clean motor oil.



0900c15280051ec0.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Always torque the bearing caps to specification


0900c15280051ec1.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Main bearing cap bolt tightening sequence on 3E and 3E-E engines

  1. Fit the upper bearings halves into the block and position the lower bearing halves in the bearing caps.
  2. Place the crankshaft into the engine block, making sure it fits exactly into its mounts.
  3. Install the upper thrust washers on the center main bearing with the oil grooves facing outward.
  4. Install the main bearing caps and the lower thrust washers in the proper sequence. Make sure the arrows on the caps point towards the front (pulley end) of the motor.
  5. Tighten the cap bolts to specification in three passes. On 3E and 3E-E engines, use the correct sequence.
  6. Double check the end-play of the crankshaft by repeating the procedure described earlier.
  7. Turn the crankshaft through one or two full clockwise rotations, making sure that it turns smoothly and evenly with no binding.
  8. Attach the piston rods, following procedures given earlier in this section. Remember that the rod caps must be reinstalled in their original positions.
  9. Install a new rear main oil seal into the retainer and install the retainer onto the block. Tighten the bolts to specification.
  10. Install the rear end plate on the engine.
  11. Install either the driveplate (automatic) or the flywheel (manual), observing the matchmarks made during removal.
  12. If equipped with a manual transaxle, reinstall the clutch disc and pressure plate.
  13. Install the oil pump.
  14. Install the oil strainer and oil pan, using new gaskets.
  15. Rotate the engine into its upright position and continue reassembly of the timing belt, idler pulley and covers.
  16. Reinstall the engine in the car, following procedures outlined earlier in this section.
42 Foot pounds (Final torque)

Dec 15, 2012 | 1992 Mitsubishi 3000GT

1 Answer

Workshop manual for a 1994 nissan serena


Cylinder head bolt torque sequence
The Rod Bearing Cap Torque
The Main Bearing Cap Torque 38 Foot pounds (Final torque)


Step 1: Torque 10-12 Ft/LbsStep 2: Torque 17-21 Ft/Lbs


Note :
Torque sequence ------------------------
' 11 '
front ' 13 9 3 1 6 8 '
of ' '
engine ' 14 7 5 2 4 10 '
' 12 15 '
------------------------
Step 1: Torque all bolts in sequence 22 Ft/Lbs
Step 2: Torque all bolts in sequence 47 Ft/Lbs
Step 3: Loosen all bolts in reverse sequence
Step 4: Retorque all bolts in sequence 22 Ft/Lbs
Step 5: Retorque all bolts in sequence 43-51 Ft/Lbs
Step 6: Retorque bolts 11 thru 15 in sequence an
additional 4-6 Ft/Lbs
** CAUTION ** This engine uses 2 different length head
bolts. "#1" Is the long bolt, while remaining bolts
are short. **Do not confuse location of these bolts**
recheck final torque in sequence

Dec 06, 2012 | Cars & Trucks

1 Answer

2002 mazda millenia v6 emergency parking light


My guess would be a faulty abs module. you could have your vehicle scaned to extract codes that may diagnose it for you.

Jun 24, 2012 | 2002 Mazda Millenia

2 Answers

Rebuilding 4.2 v6 ford need torque spec for main bearing


V8 Engines Component Torque Camshaft Sprocket Bolt 40-45 ft. lbs. Camshaft Thrust Plate-to-Engine Bolts 9-12 ft. lbs. Crankshaft Pulley-to-
Vibration Damper Bolts 35-50 ft. lbs. Cylinder Head Bolts All Except 1993 Flanged Bolts Step 1 55-65 ft. lbs. Step 2 65-72 ft. lbs. 1993 Flanged Bolts NOTE 1 Exhaust Manifold Bolts All Except 1993 HO Cobra 18-24 ft. lbs. 1993 HO Cobra 26-32 ft. lbs. Flywheel/Driveplate-to-
Crankshaft Bolts 75-85 ft. lbs. Intake Manifold Bolts Note 2 Upper Intake Manifold-to-
Intake Manifold Bolts 12-18 ft. lbs. Main Bearing Cap Bolts 60-70 ft. lbs. Oil Filter Insert-to-Engine Adapter Bolt 20-30 ft. lbs. Oil Pan 1979 Step1 Large Bolts 11-13 ft. lbs. Small Bolts 7-9 ft. lbs. Step 2 Large Bolts 15-17 ft. lbs. Small Bolts 10-12 ft. lbs. 1980-87 9-11 ft. lbs. 1988 and up 6-9 ft. lbs. Oil Pick-up Tube-to-Main Bearing Cap Nut 22-32 ft. lbs. Oil Pick-up Tube-to-Oil Pump Bolts 1979-87 10-15 ft. lbs. 1988 and up 12-18 ft. lbs. Oil Pump Bolts 22-32 ft. lbs. Rocker Arm Fulcrum Bolts 18-25 ft. lbs. Thermostat Housing-to-Engine Bolts Through 1987 9-12 ft. lbs. 1988 and up 12-18 ft. lbs. Timing Chain Cover Bolts 12-18 ft. lbs. Valve Cover Bolts 10-13 ft. lbs. Water Pump Mounting Bolts 12-18 ft. lbs. NOTE 1 Step 1 Tighten bolts in sequence to 25-35 ft. lbs. Step 2 Tighten bolts in sequence to 45-55 ft. lbs. Step 3 Tighten bolts in sequence an additional ¼ turn. NOTE 2 Step 1 Tighten bolts in sequence to 23-25 ft. lbs. Step 2 After assembly, retorque all bolts in sequence to 23-25 ft. lbs.let me know if this helps and how about a rating.

Apr 23, 2011 | Ford F-150 Cars & Trucks

1 Answer

I need the 2003 Mazda 6, 2.3 - 4 cylinder main bearing torque specs and sequence asap please.


zjlimited_34.jpg

Fig. Loosen the remaining camshaft cap bolts using this sequence-2.3L (KJ) engine


zjlimited_35.jpg

Fig. Tighten the camshaft cap bolts using this sequence-2.3L (KJ) engine

Nov 09, 2010 | 2003 Mazda Mazda6

1 Answer

2004 mazda 6 3.0L V6 main bearing caps(bootom end) has 16 bolts need torgue specs please!


Okay, the main bearing caps only have 10 bolts, i think your looking for the connecting rod caps, they have 16 bolts, i will list them both, theres a tightening sequnce for the main bearing caps, these are the caps that hold the crankshaft to the engine block, the connecting rod caps hold the pistons to the crank and they have 16 nuts,For a 2004 mazda 6 with the 3.0 engine the torque specs are as follows.
Connecting rod bolts step 1) 19.2 - 23.6 ft lbs.
step 2) tighten an additional 80 - 100 degrees

Main bearing caps step 1) 32.5 - 33.9 ft. lbs.
step 2) tighten an additional 175 -185 degrees.
heres a diagram for main caps to tighten in order.
hope this is helpful.fc3bff9.gif

Aug 20, 2010 | 2003 Mazda Mazda6

1 Answer

What is the right Torque Specification of the cylinder head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you...


Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees

May 17, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Belt routing instructions for turbo and power steiring on v6 mobiles.


Click on the following free direct Link. It has several Diagrams including the correct Serpentine/Drive Belt Diagram for your 1998 Mazda Millenia based upon your Engine Size and unspecified Engine Options.
Included are Instructional and Directional Diagrams on the locations of the various Adjustment Bolts/Nuts which will have to be loosened in order to remove the Belts; and tightened in order to reinstall the Belts.

http://www.2carpros.com/car_repair_information/year/1998/make/mazda/model/millenia/1998_mazda_millenia_drive_belt_routing_diagram.htm

Mar 11, 2010 | 1998 Mazda Millenia

1 Answer

2003 mazda 6 3.0 need the main bearing torque specs


I'm sending you the torque specifications for your main bearings and also your head bolts. I also sent you main bearing and cylinder head tightening sequence. I hope this will be useful2c713bf.giffce6623.gif
Main Bearings Torque specs. 40-43 Ft. Lbs.
Cylinder Head Torque specs. 56-60 Ft. Lbs.

Oct 05, 2009 | 2003 Mazda Mazda6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...