Question about Chevrolet Chevy

Open Question

Captiva won't go into gear, traction control warning light is on and check engine light is on

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: Check Traction Control warning light

I can't give you an explanation for why the car is telling you to check trac. control but i can try to give some help on maybe fixing it. Try - turning on the car, turn the traction control off, turn the car off, turn the car on. Then turn the traction control back on and push the system check button. That should i guess "reset" the trac control system.

Now the noise from the front right of the car is MOST LIKELY the air compressor pumping air into the bags. (i own a 97 Continental but i've never had a problem witht the trac control)

Posted on Jan 22, 2009

Ad
MNfisherman
  • 11896 Answers

SOURCE: 2008 malibu service esc traction control and eng

The torque converter clutch circuit may be at fault. The best way to determine the problem is to have a scanner/computer to read check engine codes.

Posted on May 06, 2009

  • 3 Answers

SOURCE: Handbrake and Traction control warning lights illuminated amber

Had DTC warning light come on on my 120i (2005 reg). Without prompting dealer contacted BMW who agreed to pay for part and half the labour as it seems to be a common problem for 04-06 models.

Posted on Sep 17, 2009

peterrance19
  • 399 Answers

SOURCE: I am getting random warning for traction control.

hi hope i can help the traction control is controled by signals from the abs system if you lose a sensor imput the abs light will also come it looks like you have a sensor on the blink hope you find this helpful if so please give it a rating thanks pete

Posted on Nov 24, 2009

  • 4088 Answers

SOURCE: check engine light, cruise control light flashing,

Take the car to Autozone or similar business for a free code read with a scanner. Depending on what turns up, they will be happy to sell you any needed parts.

Posted on Dec 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traction control lights come on dash in Holden Captiva 2010 diesel lack of power


when the traction control is activated , there is a reduction of power from the engine to compensate for that lost traction control
run the fault codes , repair the reason for the traction control light and then reset the computer using a scan tool and the engine power will return

May 13, 2015 | Holden Cars & Trucks

1 Answer

Warning light on dashboard. With squiggly tire


That is the traction control light. If it comes on when you start and stays on there is a problem with the traction control system. If the check engine light is on the traction control light will also come on to let you now that it is disabled.

Year, Make, Model, and Engine Size?

Sep 27, 2014 | Cars & Trucks

1 Answer

Traction control and abs warning light comes on,how do I fix??


the ABS system is defective, probably one or more of the sensors.

Traction control system works with the ABS sensors to monitor to monitor traction slippage.

Jul 20, 2014 | 2001 Chevrolet Impala

1 Answer

My clutch won't go down and won't go into any


ABS light coming on,For this get the Engine computer scanned.It can be error codes stored in computer.------------
For more details regarding this click the link below:-----
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

---------------
And now for clutch not going in gears it can be faulty clutch issue or problem with clutch cable.This has to be inspected.For more detailed instructions regarding Peugeot clutch problem,click the link below:-----
Peugeot 307: Clutch will no go in gears?
http://whoisbyme.blogspot.in/2012/05/peugeot-307-clutch-will-no-go-in-gears.html

---------
This will help.
Thanks.

May 30, 2012 | 2004 Peugeot 307 SW

2 Answers

Holden captiva is lacking in power, check engine light comes on and traction control lights come on and decline ascent light on dash shortly followed by service light and a large clunk sound. The motor...


I got a same problem in Holden Captiva diesel 2010 model as soon as you accelerate on traffic light the traction control light comes on engine light on dash, engine lack of power, turn the engne off for few seconds and goes ok but engine light stays on dash. Checked with the tech tool, it comes fuel metering code, can bus code... What it could be????. I've already changed fuel filter and did general service, still comes on. ANY IDEA PLEASE. OR I BURN THIS CRAPTIVA

Oct 13, 2011 | Cars & Trucks

1 Answer

Why does my traction off light come on?


You either have a problem with your engine control system, the traction control system, or you are not in the correct gear. See the explaination below. This is from the 2000 Chevrolet Cavalier Owner's Manual.

TRAC-OFF LIGHT

... If you turn the system off by moving the shift lever

to FIRST (1) or SECOND (2), the warning light will

come on and stay on. To turn the system back on,

move the shift lever back to a position other than

FIRST (1) or SECOND (2). The warning light

should go off. (See "Enhanced Traction System"

in the Index for more information.)

 The warning light will come on when you set your

parking brake with the engine running, and it will

stay on if your parking brake doesn't release fully.

If the transaxle shift lever is in any position other

than FIRST (1) or SECOND (2) and the warning

light stays on after your parking brake is fully

released, it means there's a problem with the system.

 If the traction control system is affected by an

engine-related problem, the system will turn off

and the warning light will come on.

If the Enhanced Traction System warning light comes

on and stays on for an extended period of time when the

transaxle shift lever is in any position other than FIRST
(1) or SECOND (2) your vehicle needs service.

Aug 08, 2011 | 2000 Chevrolet Cavalier

2 Answers

What does the master warning light mean? (triangel with ! and the three lights points to the car).


This light shows operational status of traction control system. If it is constantly lit when engine is running, this means that traction control system is off. If the light flashes during driving, it means the loss of traction at the wheels, and traction control system is operating- decreasing engine torque to stop exessive wheelspin.
Good luck.

Mar 21, 2010 | 2003 Toyota Prius

1 Answer

RECENTLY MY CHECK ENGINE LIGHT CAME ON THEN MY TRACTION CONTROL LIGHT CAME ON....THE CODE GIVEN TO ME FOR THE CHECK ENGINE LIGHT WAS P0171 COULD THEY BE RELATED....ALSO CAR IS SHIFTING REAL ROUGH


Engine light on means that your lambda probe is malfunctioning just raplace it and it will come off,or the mixture of gases and gas is not proper and you need to tune the car at bosch motronic.
traction control warning light means that the sensors analizing it are malfunctioning and or you have a serious problem on the traction control

Jan 20, 2010 | 1999 Lexus ES 300

1 Answer

Warning lights what do they mean, a triangle with a line in the middle


This is the Traction Control Warning light. Traction control is device added to the engine/gearbox sytem, and is designed to help minimise wheel spins when moving away, particularly on a slippery surface. When the system detects the wheels starting to slip and Traction control starts to cut in this warning light shows.

Traction control cannot do much to help in severe ice or snow though, so you can expect to see this light showing or flashing if the conditions are extreme.

If this light shows when the conditions are not extreme, stopping and restarting the engine will often reset it.

Dec 17, 2009 | 1992 BMW 5 Series

1 Answer

Upgraded 456 gears on my Avalanche now having warning lights on


rubbish
the abs sensors stopped wheels not fast spinning wheels
when there is no signal from the rotor the abs kicks in and releases he brake pressure to that wheel/s allowing them to turn to give the driver steering control
as the abs and traction control use the same wheel sensor , the traction could detect a fast spinning wheel and take action to control it
you have upgraded the final drive ration to 4.56 from standard which will be 3 point something which will make the engine rev higher to get the same speed
and that could be where the problem is coming from as there is a connection between the engine rpms and the road speed and the preset parameters may be not reading the new settings from the new diff ratio
putting on the lights and dropping power

Apr 14, 2017 | 2002 Chevrolet Avalanche

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...